Where is pollen filter,nissan pathfinder 2006?

Your vehicle does not have a cabin air filter (also known as a pollen or AC filter). Vehicles without cabin air filters typically have a plastic mesh that prevents leaves and other foreign objects from entering the HVAC system. This mesh is part of the vehicle and does not need to be changed.

The 1997 Pathfinder does not have a Cabin Ait Filter. Not until 2001-2002 did Pathfinders come with CAFs. I have a 1998 Pathfinder and wasted 2 hours of my life I will never get back because some outfit on the Internet was listing a CAF for 96 and on Pathfinders they obviously had not done their research.

Go here so you can find out how to replace and or clean the filter .
https://www.youtube.com/watch?v=8zFIRHp-NS courtesy of youtube . https://www.youtube.com/watch?v=8zFIRHp-NS

How To Install Replace Dust and Pollen Cabin Air Filter ...

? 3:02
https://www.youtube.com/watch?v=xfMfd9eDc5k
Sep 25, 2012 - Uploaded by 1A Auto Parts
http://www.1aauto.com/1A/CabinAirFilters/Nissan/Sentra/1ACAF00133 1A Auto shows you how to repair ...

Cabin air filter replacement- Nissan Maxima - YouTube

? 5:22
https://www.youtube.com/watch?v=_WgA8IYcaxU
Jul 19, 2011 - Uploaded by filterheads
Purchase this filter at: http://www.filterheads.com/AQ1093C AQ1093C This filter fits Nissan Maxima 00-03. The ...

Cabin air filter replacement- Nissan Versa - YouTube

For nissan pathfinder cabin air filter replacing procedure with diagrams:---
Click the link below:---

http://repairhelpcenter.blogspot.com/2012/12/2003-nissan-pathfinder-cabin-air-filter.html

------
These will help.
Thanks.

Dust & pollen cabin air filter location:

to access the cabin filter the glove box will need to be removed.

hi the cabin/pollen filter is usually accessed behind the passenger drop down glove compartment adjacent to the heater assy best to remove the drop glove compartment to ease access

Under the glove box.

Put the seat back all the way rearward (just to give you more room to move.

On the panel just directly below the glove box, there should be two Torx 25 screws. Remove those and pull that panel downward and rotate the right side back, that should release it from the kick panel on the left.

Now towards the back you should see the blower motor. Kind of an off white color and a black panel on the bottom of that.

It's held in with four gold colored Torx 25 screws. Remove those and the pollen filter should be in there.

If you have the thin pollen filter, you can get away with simply removing the two golden Torx 25 screws closest to you, carefully bend down the black plastic cover (carefully enough to squeeze the pollen filter past, I've seen people break them cause they do it too much).

If you have the thicker pollen filter, you have no choice but have to remove the four screws.