Remove fuse labelled "dome" on engine compartment fuse box. unfortunately this also isolates the radio. I have found when re connecting battery alarm goes off. remove "dome" fuse and then replace it. all ok then.
doesn't work.
×
There is no fuse that i know of to disable the alarm, i lost my keyless remote entry button and the alarm went off, as you know you cant start the car after this has happened, however, you can uninstall the alarm completely, fairly simple to do if you purchase a hanes manual or chilton, toyota uses red quick connectors for their wiring harnesses and all you have to uninstall is under the steering column on the drivers side, good luck. hope this helps, i lost all hope with my corolla but after i took the alarm out it worked fine.
16,457 views
Usually answered in minutes!
Hello. There is no fuse to 'disable' the alarm, if you have a Toyota system fitted. If you have lost the remote, and the system has been activated by replacing the battery, or something like that, you can try the following. Note: This will only work on a Toyota system. Put the key in the ignition. Turn the key to 'run', then 'off', 5 times, rather quickly. Do not move the key to the start position at any time. After the last run-off key cycle, then turn the key to start. See if that works for you. Please let us know. .
i tryed that and it was a no go,, did not work
The car starts and runs smooth its the alarm that just go on anytime
×