Question about 1991 Peugeot 405

1 Answer

I need to fit a fan belt on a peugeot 306 estate

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,741 Answers

Just in front of the altenator, there is a 10mm bolt, tighten that and it will tighten the fan belt .
these belts are quite tight, make sure the one you have is the correct length, sometimes the suppliers will send one that is close to the correct size, and is sometimes a few milimeters smaller.

You dont normally have to loosen anything else, but the easiest way is to put the belt on the alternator, tensioner and power steering first, then ease the belt over the ridge of the crankshaft last, one rib at a time, but evenly all the way around the pulley.


i need to fit a fan belt on a peugeot 306 estate - b3d5a98.jpg for more step by step instructions with proper diagram please click on this link directly
http://www.howtodothings.com/automotive/a3038-how-to-replace-a-fan-belt.html
---------
this will help.thanks.

Posted on Feb 20, 2010

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to get at dashboard lights - removal?


pls.what is .info economic mode on c3

Jan 30, 2014 | 2000 Peugeot 306

1 Answer

Fan belt diagram


Hi there:
The serpentine belt routing diagram for Peugeot 306 2.0 HDI - DW10TD - RHY engine, with A/C (Air Conditioning) system...



8_2_2012_9_05_03_pm.jpg

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Aug 02, 2012 | 2000 Peugeot 306

1 Answer

Whining noise coming from pulleys in 1998 peugeot 306


i have just bought a 306 peugeot estate and it is making a noise if it is catching and it is using a lot of petrol what can i do

Apr 24, 2012 | 2007 Jeep Wrangler Unlimited Rubicon 2...

1 Answer

My 306 estate is turning over but will not start. How do I disconnect the immobiliser? It isn't the one with a keypad to start


The security system can't be bypassed in this car. You will need to get the system scanned to see what the fault issue is.

Apr 10, 2012 | 2000 Peugeot 306

1 Answer

Peugeot 306 hdi altenator belt i am looking for a diagram off how to put it back on but cant find one its got air con on it


The serpentine belt routing diagram for Peugeot 306 2.0 HDI - DW10TD - RHY engine, with A/C (Air Conditioning) system.

tdisline_144.jpg

Please do rate my response. Thanks!

Jan 05, 2011 | Peugeot Liberte Cars & Trucks

3 Answers

Where is gearbox oil refill plug on peugeot 306 hdi 51 plate


it is a 19mm bolt on the side of the gearbox it takes ep 75 90 gear oil if it helps

May 02, 2010 | Peugeot Liberte Cars & Trucks

1 Answer

Peugeot 306 diesel red stop light is on and both fans run


there are 2 relays inbetween the 2 fans behind the front grill the wiring to the relays tend to corrode.
what you need to do is replace both relays and the wiring conectors

Dec 02, 2009 | Peugeot 405 Cars & Trucks

1 Answer

How to tighten my 306 dt 98 fan belt


you need to take off the drivers front wheel and plastic cover infront of the engine.
then you need to crack off two allen key type bolts holding the braket and tensioner pully in place, that is positioned just right of the crankshaft pully. Once the whole unit is slack you have to loosen the adjuster that is visible underneath the tensioner braket to take the tension off the belt. Once the belt is loose enough take it off and reverse process avoiding overtightening new belt. [It needs a little give to avoid damging bearings in the pully]

Sep 01, 2009 | 1990 Peugeot 405

3 Answers

Speedo, rev counter and fuel gauge not working on peugeot 306


hi i have a garage this problem i encountered myself the other week disconnect the battery for about five minits and then reconnect this solved the problem on this P reg 306 good look if you have not sorted your problem.

Mar 23, 2009 | Peugeot 405 Cars & Trucks

Not finding what you are looking for?
1991 Peugeot 405 Logo

6,559 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

scj103

Level 2 Expert

104 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...