2005 civic engine light - 2005 Honda Civic

Having changed the canister vac valve you may have a connecting hose leaking.

you tell us?
a walk on the wild side?
you could read the FSM on both cars, and figure it out.
not me.... sorry./
but is covered in all civic forums, (never this one)
seen that covered, (lots of issues)

Hi, my check engine light keeps blinking. What does this mean, its a hybrid 2005 civic. Cant get a repairer here in abuja, nigeria

sound like throttle position sensor (tps) you can not go over 65 because computer is running in fault mode.

You will have to get the engine trouble codes read to see if the same problem you had fixed still exists or a new problem is now there.

means an error was tripped by one or more of the sensors. in order to find it you need an obdII reader which at autozone or other part stores run about from 80 to 300 bucks

It is possible that the emission problem that triggered the check engine light has something to do with the car not shifting into high gear. You need to have the honda scanned for codes to see what exactly is wrong, correct the problem, and see if the transmission issues clear up after the fix. Parts stores offer a free check of engine codes, and can explain what they mean and offer ideas on how to fix the problem. If after getting the codes you still have questions, post them here with the code #'s.

If there is an advanced auto or an autozone near you, take it there, they don't charge to hook up a code scanner. Takes about a minute, a repair shop will charge almost $100.00.

blown fuse man..check all fuses even the ones in the engine bay.hope this helps

this car come with tree diferent engines the answer i'm going to give you is for a 1.7 engine sohc that codes means you have a leak on the evaporative system this system monitor the vapors from fuel tank this code some time might appear for filling the fuel tank with car runing i recomend you to clear code and make sure the fuel cap is not loose because there is a fuel pressure sensor in the tank and if the sensor don't read the right pressure then it will set the code