Peugeot 206 temperature gauge not working?

Question edited for clarity. When I first read it, I thought, "a Peugeot has a fan to cool the petrol"? All for the want of a comma,

The system is complicated. The ECM does all the actions. The temperature sensor reports to the ECM and that sends the signal to the relay to turn the fan on.

This is really a job for an auto electrician with a pro grade scan tool computer.

Help in the link

https://www.google.com/search?q=Peugeot+206+1.4,+coolant+fan+wiring

..

fuel sending unit in the tank or wiring to it

that is in the FSM, buy the book at Peugeot dealer.
torque , not torx.?
torx is a head shape.
try a real forum for french cars?
http://www.frenchcarforum.co.uk/forum/viewtopic.php?f=4&t=40058

goggle works.
https://www.google.com/webhp?gws_rd=ssl#q=peugeot+206+1.4+%2C+engine+torque%2C+for+bolts


TU engine? or ET? or>
1.4 L TU3JP I4 (petrol)
1.4 L ET3J4 I4 (petrol)
1.4 L TU3JP I4 (petrol)
1.4 L TU3A I4 (petrol)

know what engine, first is best.

please visit an alarm shop for reprograming.

Need new front wheel bearings on Peugeot 206 02 plate how do you change the bearings

its sounds like a grounding fault these are very difficult to locate but if u find an auto electrician with patients & guide him/her then you might get lucky!

Start by cheking the coolant level first and add as necessary. If it is low, add, and then start and turn on the heat to full and check operation. it is possible that you have a small leak and have not noticed an operating/overheating issue. Let me know if you need anything further.

It seems like the clutch pressure plate has given in. Best would be to replace the clutch pro-kit.( Clutch pressure plate, clutch plate and release bearing)

hi ive a peugeot 206cc 02 reg, the STOP light keeps flashing ive checked the normal oil and water but alls ok so whats the problem still runs fine and temp stays where it should??? any tips??

if has fuel filter change it.