- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
www.crutchfield.com/.../Buick-Century-Stereos-... Crutchfield CorporationFind car audio products that work with your Buick Century ... your Century, 2005 Buick Century Sedan, 2004 Buick Century Sedan, 2003 Buick ... Here are stereos, speakers, and subwoofers that work with the Buick Century ... Rear Speakers .... time to talk to you through installation snags, troubleshooting, or everyday use.
These belts are very easy to change. Before you start draw the diagram of how the belt is routed. Once you have the routing, there is a spring loaded tension er pulley. You will need to pry it over to get the belt off. Then once you get the belt off, then put the new belt on all of the pulleys. Once it is on all of the pulleys. Pry the tension er and put it back on that pulley. PLEASE RATE! A lot of free questions don't get answered. So PLEASE click the 4 thumbs up! Thanks! Have a GREAT DAY!
there is a flasher for both 4 way & regular turn signals ( check to make sure the bulbs are good
the backs are easy >>> Just step on the brake, If the lights light up the bulbs are good you my have to remove the bulbs one at a time in the front check your ground wires to the lights if everything is good replace the flasher unit if that fails replace the turn signal switch
buy filter
open hood
unscrew air filter cover disconect sensor if necesary
take out old filter
put new filter
screw cover back
conect sensor
close hood
start car
enjoy your drive
The firing order for a 4-cylinder 2.2L Buick Century is: 1-3-4-2. The distributor rotates in a clockwise direction, with #1 plug wire located at the upper left of the distributor
The firing order on a 3.1 v6 is simple. 1-2-3-4-5-6 See a diagram of the 3.1 and 3.8 here.
http://www.2carpros.com/forum/1999-buick-century-spark-plug-firing-order-vt177159.html
http://autorepair.about.com/od/enginefiringorders1/
×