How to put on a serpentine belt

The picture is for a zetec. Let me know if wrong diagram?

if your talking about the serpentine belt there should be a decal somewhere under the hood that shows the routing.

Check this for Ford Escort ZX2 2.0L (click image for zoom)...




Additional details and other diagrams could find in THIS LINK: diagrams/ford/escort/2002

Hope helps.

http://i48.photobucket.com/albums/f235/importfrk03/beltroutingdiagram.jpg

Click on the following direct Link. It has the Serpentine Belt Diagrams that you will need for your specific engine options.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2001/make/ford/model/zx2/2001_ford_zx2_drive_belt_routing_diagram.htm

see diagram on hood or fan guard

Here it is. 13mm wrench to rotate tensioner

if there is no white label on top of the radiator guard,
If you buy your belt from Autozone the belt routing is on the package,If you already bought the belt you could always buy one from AutoZone and then return it after you use the routing.

This information can be found at www.serpentinebeltdiagram.com
They have all the belt routing info for any vehicle with a serpentine belt.
Hope this helps....

2.0L Engines
See Figures 11, 12 and 13
The accessory drive belt for 2.0L engines has no provision for manual belt adjustment, since these engines use an automatic belt tensioner. Drive belt slack is taken up by the automatic tensioner.
Movement of the automatic tensioner assembly during engine operation is not a sign of a malfunctioning tensioner. This movement is the tensioner self-adjusting and is required to maintain constant belt tension.
The belt tensioner has a belt length indicator. If the indicator marks are not between the MIN and MAX marks, the belt must be replaced.
Fig. 11: Drive belt routing-2.0L SOHC engine with A/C Fig. 12: Drive belt routing-2.0L SOHC engine without A/C Fig. 13: Drive belt routing-2.0L DOHC engine