93 mazda mx3. has spark, gas, air.. but its just turning over and will not start.. when i try to start it the fan turns on and stays on til i turn the key off.... any ideas? thank you
93 Mazda mx3 if was running and died or trend off and then will not start it might be the engine coolant temp sensor located next to the number one injectr It should be a two pronged sensor green at top and should set Codes for it and air temp and mass air flow as well but it is just the engine coolant temp sensor
If this is a Cam-belt model rather than Cam-chain then probably needs cam-belt replacement - IF you've got compression so easiest is to get a compression tester which will give you a pretty good indication if you need new Cam-belt.
It sounds like a starter, you can try hitting it and it shud work but you would have to get it replaced , also check to make sure the belts are tight
445 views
Usually answered in minutes!
×