2000 Chrysler 300M Logo
Will Chandler Posted on Feb 04, 2010

I have a Chrysler 300m, and the tail lights stay on when i turn the car off. This just started today, and i was wondering, what could the problem be?

2 Answers

mikedajakleg

Level 1:

An expert who has achieved level 1.

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 29 Answers
  • Posted on Feb 05, 2010
mikedajakleg
Contributor
Level 1:

An expert who has achieved level 1.

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Feb 05, 2010
Answers
29
Questions
0
Helped
12195
Points
63

Press the brake peddal in then pull it all the way out by hand see if this works i have a jeep that does the same thing

noclu3

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Feb 19, 2010
noclu3
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Feb 19, 2010
Answers
1
Questions
3
Helped
542
Points
1

We had this problem with ours too. The solution was to change the vacuum power booster & master cylinder. The power booster had a vacuum leak which caused the master cylinder to not release. Eventually, it developed a small leak at the rear seal. Better to replace both at the same time.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2002 Chrysler 300M 3.5 liter, 4-door sedan. How to fix my speedometer problem?

Question edited for clarity.
Question moved to model category.

You connect a code scan tool and it tells you the issue. It will likely say a P0*** code that is 'VSS Failed no signal'. VSS = Vehicle Speed Sensor.

https://www.google.com/search?q=2002+chrysler+300m+speedometer+not+working

..
0helpful
1answer

99 chrysler 300m my tail lights wont come on but all my other lights work I checked fuses and they are good and the bulbs are also good what could be my problem

Check that the wiring harness that goes to tail lights has a ground wire connected to a good grounding spot - not rusted or loose.
0helpful
1answer
0helpful
1answer

Our car worked just fine yesterday, went to start it today and it won't turn over. What should we do? It's a 2001 chrysler 300m

battery weak? if is if you have a charger or jump it off ,then go have battrey checked..may need new one, it's winter time!!!!!!!!!!!
1helpful
2answers

2001 Chrysler 300M Engine Light on all the time

Hello, my engine light was on for a VERY LONG time and everytime I got it checked no one could tell me what the problem was because things always checked out fine. The "code" says its a loose gas cap or something, but it wasnt that. My 300M also was having A HARD TIME STARTING UP for about 8 months and leaking coolant for about a month. I finally found a mechanic who knew what he was doing; 1. Leaking Radiator 2. Coolant found in #2 or #3 cylinder. The cause of this was a busted HEAD GASKET. If your 300M has trouble starting and the Engine light stays on have a mechanic check your engine for a busted head gasket and see if all your cylinders are firing correctly. I had to pay $2600 for a new Head Gasket, Radiator and all new hoses plus labor. CRYING!!!!!!!!!!

I have a 2001 300M 130K - very well kept. Stuff happens...
0helpful
1answer

How do I install tail light bulbs in a Chrysler 300m

three or four plastic wing nuts in trunk behind light back them off an pull light asm away from body
1helpful
1answer

Fuse keeps blowing in 99 chrysler 300m

You have a short in the wiring somewhere. have you tried to pull the connectors off the tail light assemblies? pull both then connect them 1 at a time to see which side is causing the problem, could be as simple as a bulb that has shorted it self out.
9helpful
5answers

Starting issues 1999 chrysler 300 m

get a starting and charging system diagnostic. I am the owner of a 99 300M and I had a similar problem. It took about 3 months before my car would not start at all. But sometimes, I would get this clicking when turning the key in the ignition. It turned out to be a short in the starter. The starter and the alternator had to be replaced.
Not finding what you are looking for?

552 views

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...