SOURCE: how many motor mounts on
there are 3. one by the transmission, one on the passenger side, and one underneath. the one underneath usually will get stones and pebbles caught in it and can easily be blown out with air. if its a vibration concern your after, the mount on the pass. side is usually the cause
Testimonial: "Thanks , A vibaration is the problem that I am trying to solve ."
SOURCE: how do you know which motor mounta are bad on a
The way I test that is to have someone in the driver seat with the emergency brake on. While he puts it in drive you are to stand on the left or right hand side of the engine. Not in front of the car. Watch theengine while the other person gently gives it gas in a forward gear. See if the motor raises up higher then normal on one side. Then have the driver put it in reverse and apply gas gently and watch the motor again. Which ever side raises to high is the side the mount will need replaced. If both sides raise then both need replaced. I hope this helps, The Raz
SOURCE: 2000 ford focus motor mount and tensioner keep
that is a common problem with the ford focus i have a 2001 and if your overflow bottle has the smallest of cracks in it then it will leak onto the mount and then to the tensioner. I would start with the overflow bottle e-mail me if you need more help
1,789 views
Usually answered in minutes!
×