At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
i have a 1988 k1500 seirra truck, that will idle fine then it will choke its self out and stall out.(i have a new egr synolyd,new egr, a 1992 ecm pulled from a junk yard,new cap,rotor, plugs wires,distributorand, a new coil,,map sensor,and a 2 year old tps sensor; and the copression is 140- 155 in all cylinders), but it wont say running, what can i look at next to help it run and stay running?
when mine was pulling up the code it pulled a 12,33, and45
Hello
Welcome
Code 24 is Throttle Position Sensor,
This is locared on the right side of the throtle body accross from the throtle linkage there is 2 torx screws holding in place and one wire end to disconect install reverse from instructions
code 34 Speed Control Servo Circuit. No check engine light will post. Your cruse control servo is not turning on and off like it should. I would do the tps first then disconect the batery for 5 minn then re check the car for codes, the tps might be messing with the speed control servo. Let me know if i can help more!
If the engine was ran that much after overheating, you probably warped the head.
The crank sensor may also have been damaged by heat and need to be replaced. Check the spark plugs as well for cracked insulators or worn (read melted) tips.
try reseting your computer by removing the positive cable for 45 secs then connect cable, if this does not work call a parts store they should tell you
hello i got a 1990 dodge daytona shelby the falt code 34 is 1987 and later models: cruise control servo failure well for your radio there is lose wirng harness make sure there all plug in all the way on the back of your radio you may have a lose fuse in the fuse box
×