At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There is a Relay usually in the interior Fuse Panel under the Dash for the Turn signal that's where the clicking noise comes from also when your turn signals are on, I suspect you have a bad Relay or even a Fuse. Its unlikely the bulbs simultaneously went out in the Dash. So check your fuses and the Turn Signal Relay.
It is not the flasher if the hazards work, it is 1 flasher for both turn signals and the hazard lamps. It is in a relay block ( along with the blower motor relay ) under the dash, about in line with the steering wheel column ).
Try tilting the steering wheel all the way up, and test again.
The other quick test is to cycle the hazard switch a few times, to see if it cleans the contacts for the turn signal on the MFS,
On your model,there is a separate hazard relay to the turn signal relay.On the fuse block(right-hand side kickpanel just inside the r/hand door)the upper left relay is the turn signal relay.Bottom right is for the hazards.Hope this helps you.
×