Head gasket repair requires stripping the entire motor down to the block, and replacing every gasket in your way down, as well as the head bolts (torque-to-yield).
the way the saturn timing components are ran i would not suggest this unless you are heavily mechanically inclined. theres alot of tedious tear down as well as torqueing to spec on the build back up.
if you have the time, patients and know how to do it i would say go ahead, but if you are hesitant i would get someone else to do it.
to finally answer ur question any hanes or mitchell repair manual will tell you how to dissasemble and reassamble your engine step by step.
175 views
Usually answered in minutes!
×