At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
700 is generic code meaning a transmission malfunction. It could electrical or mechanical. You'll have to retrieve the other codes. The solenoid packs are the most common parts replaced on these.
It means there is at least one transmission code set in the TCM's memory. P0700 is an informational code only. More diagnosis is necessary to identify what the transmission fault is. This requires a scan tool that will communicate with the transmission module http://www.obd-codes.com/p0700
Type in odb2 po700 in google and it will pull up your answer. The other 2 codes im unformiliar with. May mean you need to update your obd2 code reader software or those are transmission codes. Go to auto zone or orielies
P0700 is an informational code only. It doesn't point to a direct fault in the engine, only a general fault in the transmission. More diagnosis is necessary to identify what the transmission fault is. This requires a scan tool that will communicate with the transmission module.
More often then not, the cause of this code is that there is a transmission problem of some kind. The TCM detected the problem and set a code. P0700 means that a fault code is stored in the TCM. However this doesn't rule out the possibility of a failed PCM or TCM (unlikely).
For a P0700 the only real solution is to acquire a scan tool that will communicate with the transmission control module. Extracting this code from the TCM will be the first step in repairing the fault in the transmission.
Code 731 is for a problem with the gear ratio for first gear. Code 700 is a general fault code that means you have a problem with the transmission control module or the transmission. The 731 code can cause the 700 code, and the problem could be a speed sensor inside the transmission. The computer does not like the signal being sent from the transmission to the computer.
The code 700 is a notice that there is a problem with the trans control module, and code 1776 could be a problem with the low-reverse solenoid inside the trans. Code 1776 can trigger the code 700. The solenoid would need to be tested.
the po700 code will be found in the engine controller all it means is there is a code preasent in the trans controller a good scan tool is needed to communicate with trans controller to retrieve the stored codes that specify problem
×