I just purchased a 1994 Oldsmobile Regency 98 with a clifford pursuit alarm system. There is a box on the dashboard that looks like a telephone keypad. This doesn't require a remote to use (the car remote is only for locking/unlocking the doors. I've been told what the security number is, but I can't figure out how to use this alarm system. Is there some sort of manual I can get for it?
SOURCE: my keyless entry remote stopped working so i had
yes the remotes do have batteries. how ever that might be your problem or the remotes lost its code for programing. step when turning alarm off---- if its a factory alarm put the key in the drivers door when the door is closed and lock then unlock it thats the manuel shut down for factory. step 2------- aftermarket alarm. look for a valet switch most likely it would be installed by the driver kick panel or by the under dash fuse box. when u find it put the key into the ignition. turn it to the run position. within 3 seconds press and hold the valet switch for 3 to 5 seconds you should here a confirmation chirp and the led light will stay on solid and wont blink give it a world let me know what happens
SOURCE: 1991 oldsmobile 98 fuel filter replacement location?
my fuel filter is located right behind the pass side tire on the inner side of the frame.
SOURCE: 1990 Oldsmobile Ninety-Eight Regency Brougham
if you are not experienced mech. maybe you should take it to one
SOURCE: Flashing headlights while the car is off
I’m happy to assist further over the phone at https://www.6ya.com/expert/ramy_d9e7ebea3891f482
Testimonial: "Thank you. However, when the car is running, we turn on the headlights and the relay on the driver side dash board chatter stops. ANY THOUGHTS??????? We are thinking of looking at the multi function turn signal switch."
88 views
Usually answered in minutes!
×