According to the people at jeep it can not be disabled. WRONG!!!! here are the steps that work.
First you must pull the plastic off the front of the dash on the passenger side.
Behind the glove box you will find a metal box shaped compartment.
Inside that box is your alarm. DO NOT
DISCONNECT IT YET!!!!!!!!!!
The most important thing is the jeep must be running before you disconnect the alarm.
Start the jeep and look at the little box and you will find one screw that is holding the alarm box in place. remove the screw and disconnect the wires going to it.
At this point you can turn off the jeep.
The reason you must have the jeep running is the computer shows it has an alarm in place and if you
disconnect it while the jeep is not running it will shut down the jeep thinking it has been stolen.
With the jeep running and you disconnect the alarm it will not be able to send the code to the computer showing an alarm is
in place and the jeep alarm will not cause you any problems ever again..
If you have questions about this just let me know at
[email protected]
×