My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.
I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.
CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information questions. Feel Free to contact me at FixYa.com!
Again my apologies...
Thanks!
http://www.2carpros.com/car_repair_information/year/1993/make/plymouth/model/acclaim/1993_plymouth_acclaim_drive_belt_routing_diagram.htm
SOURCE: I need a routing diagram for the alternator belt
This might help. 2 belts on here, one for AC, other for rest of pulleys.
SOURCE: need timing diagram for 93 plymouth acclaim
go to autozone.com and go to vehicle repair info and enter your make model year and then find your timing chain replacement info and pics
i don't think you have to worry about valve bumping on that motor.
SOURCE: need 1993 plymouth voyager serpentine belt diagram
Which engine?
To replace the drive belt or serpentine belt on a Voyager check the engine size. For 2.4L engines, a serpentine belt runs the air conditioning compressor and alternator. For 3.0L models, the alternator and power steering share a belt with a separate belt for the AC. Dodge recommends checking the belts every 15,000 miles or 12 months for possible replacement. I have gone 3 yrs with one.. it will start squealing when you turn on the heater to defrost..
http://www.automd.com/46/how-to-replace-a-serpentine-belt/
Most replacement belts have a diagram on the package. However, the easiest way is to pay close attention to the belt you are taking off, and replace the new one the same way. The pulleys themselves are usually 'grooved' or 'smooth' which tells you whether the front or back of the belt is against it. The hardest part is figuring out how to release tension on the idler-pulley. If you can get the belt on and the idler/tension pulley (same thing) pulls the belt tight, chances are you got the belt right. If you don't know what I mean, then the mostest best way is to get a Clymer Manual and read up. Its really a simple thing to do yourself.
I used a long heavy duty screw driver to release the tension on a Pontiac Sunbird.. the belt will only fit on one way..
SOURCE: need diagram for belt routing on 1994 plymouth
The diagram for belt routing on 1994 Plymouth Acclaim.
948 views
Usually answered in minutes!
×