First thing to do is disconnect the battery, then put a socket on the belt tensioner and rotate counter-clockwise to loosen and remove the belt. next locate the timing belt sprocket case (in front of the engine, top middle of engine) remove the screws holding the casing on. when you have it off you should see the 2 sprockets holding the timing belt, be careful to line up the 2 notches on the sprockets ( to do this you must turn the engine crank by hand using a wrench or ratchet) by this time you should see the bottom of the casing that houses the timing belt. remove the lower case and u should see the whole timing belt and set up. hop this helps you out.
142 views
Usually answered in minutes!
×