Removal & Installation (Avalon, Camry & Sienna)
1. Remove passenger's side inner fender apron for access to crankshaft pulley. Crankshaft position sensor is located near crankshaft pulley.
See Fig. 22 -24 (in Link). Remove bolt and crankshaft position sensor. Disconnect electrical connector at crankshaft position sensor.
2. To install, reverse removal procedure. Tighten bolt to specification (71 inlb).
LINK - http://www.anubiscycle.com/fixya/98toyavalonCPS.png
Source : Mitchell1 OD
V6 's is by the frot crank shaft area & 4 cyl engines are on the blocks mid way lower area near the oil pan
2,408 views
Usually answered in minutes!
×