I need a diagram on how to put on a supercharger belt on a 2001 pontiac bonneville

go please to www.automecanico.com translate the page and search for yout topic and fix it.
God bless you

Go to this link and you will find the diagram your lookiing for. Count the belt contact points(pully) and notice where they are. http://www.paulstravelpictures.com/GM-Pontiac-Grand-Prix-Serpentine-Belt-Replacement-Guide/GM-3800-II-Serpentine-Belt-Replacement-Guide-003.html

You probably have it fixed by now, but you should have a 3.8L V6 (no supercharger).
The belt routing should be the same as my Impala 3.8L.

Hello! I'm not sure if you have the supercharged, or non-supercharged version of the 3.8 liter V6 - so I've posted both for you.

Supercharged L67 motor - Supercharger belt:





Supercharged L67 motor - Accessory drive belt:



Non-Supercharged L36 motor:




Hope this helps, and thanks for using FixYa!

-KCGTODAD

If you don't see a diagram under your hood somewhere, just put it around the crank pulley, and go "ribs to ribs, flat to flat" , and work your way around.

CLICK HERE - as you did not indicate the accessories installed.

Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

I have a 97 Bonneville, you have to undo the passenger side engine mount. No joke.

This is the one for the supercharger.

these motors have two carrier pulleys and oone tensioner. lookinjg at the motor from the rightside of car the belt goes as follaws: crank pully to super charger from the left. the right side goes up to the lower carrier which will have the flat of the belt riding on it. from there the belt routes to the upper carrier
[ loop it over so the grooves ride
] and then under the tensioner any questions contact [email protected]

http://www.mvreader.com/multiview/dayco/catalogSearch.php?autoCatalogSearch=1&make=PONTIAC&model=BONNEVILLE&year=1997&year_from=&year_to=&engine=All&l=n

This should help. Please Rate My Response! Thanks!