Question about 2008 Lexus Rx 400h

1 Answer

Key programming for rx400h 2008

Can anyone help with key programming instructions for rx400h 2008? Bought a new key from ebay and want the three buttons to work correctly.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 236 Answers

You need a scan tool to do the job. either take it to the Lexus dealership or call up your local locksmiths, a lot of them can program remotes for less than the dealer.

Posted on Jan 11, 2010

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Venza remote keyless entry problems


I have the 2010 Toyota Venza push to start. I lost the original key, so i bought a new key with the remote and its was programmed successful but this remote only had the three buttons on it, instead of four buttons ( Including the Hutch button). So i bought another new remote with the four buttons today and I want to know if it will work when i switch the programmed key into the new remote?

Feb 04, 2012 | Toyota Venza Cars & Trucks

2 Answers

Unable to program my keyless remote for 2000 chevy malibu


take key fob to a cparts store , most have a tester on the counter

Jun 08, 2009 | 2000 Chevrolet Malibu

2 Answers

Broken key fob


bought second hand fob now being reprogramed

Apr 12, 2009 | 1997 Honda Accord

1 Answer

BMW Keyless Entry not working


hi, to program the keys to the vehicle is quite simple

1) open the vehicle, sit inside and close the door

2) insert the key in the ignition and turn to position 1 so that just the air bag light illuminates

3) press and hold the unlock button on the key and remove the key from the ignition (do not release the unlock button)

4) while still holding the unlock button with the key removed press the lock button 3 times

5) release the unlock button on the remote and the door locks should lock and unlock if the proceedure has been carried out correctly

6) to program any other key(s) press and hold the unlock button on remote and again press the lock button 3 times but do not insert it into the ignition or turn the ignition on as done previous.

you may want to print these instructions and read them a few times before proceeding, if you muck up the process while programing keys, no harm will be done, you just have to start the process over. hope this is of some help, regards mark.

Apr 07, 2009 | 1998 BMW 5 Series

2 Answers

Trying to program remote key for 01 lexus rx300


Hi Are these instructions applicable to a 2006 RX300? I would be grateful for any help. Many thanks, Ben

Jan 25, 2009 | 2001 Lexus RX 300

2 Answers

06 mazda3 keyless remote programming instructions


It should be hit the unlock button 3 times, open and close the door 3 times, the locks will operate themselves twice. Hit the unlock button on the remote and it should program. you should try a remote from the dealer not from ebay.

Sep 20, 2008 | 2006 Mazda MazdaSpeed

1 Answer

Need programming instructions for RKE for 2000 Mazda 626


2000 Mazda 626
Note: Make SURE the battery is new.
Instructions for programming ONE keyless remote fob.
1. Open the driver’s door & leave open.
2. Insert the key in the ignition.
3. Turn the key to the on and off position 3 times.
4. Remove the key from the ignition.
5. After door open chime stops, press the door open button 3 times.
6. After chime, press any fob key twice.
7. After second chime, press any fob key twice again.
8. After third chime, press any fob key twice again.
9. Press the door open button once.
10. The car should give another acknowledgement chime.
11. Test key fob.
This DOES work. I just programmed mine successfully today, three hours ago.

Sep 03, 2008 | 2000 Mazda 626

3 Answers

2000 Buick Regal - Keyless remote programming


Take the remote out to the car. Point it at the front of the car and push and hold the top two buttons until your car horn sounds three times

Jul 27, 2008 | 2000 Buick Regal

1 Answer

Programming remote to open doors


Dear Customer,

If you didn't change your remote kit than its a best way to take to your dealer ,there is minor problem with sequence so they wil do free of cost with car document.

THNX

May 15, 2008 | 2006 Lexus RX400h Used Cars

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

770 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...