Fig. View of the alternator after removing the splash shield - 2.0L engines
Removal & Install - 2.0L Engines
Negative battery cable
Alternator jam nut, loosen only
Alternator adjustment nut, loosen only
Accessory drive splash shield
Alternator lower bolt, loosen only
Alternator drive belt
Alternator field circuit wiring connector, push the
RED
locking tab to release
Battery positive terminal
Upper and lower bolts, move alternator off pivot bracket
Pivot bracket
Alternator
To install:
Install or connect the following:
Alternator
Pivot bracket and torque the bolts to 40 ft. lbs. (54 Nm)
Alternator, move it onto pivot bracket
Alternator field circuit wiring connector, push
RED
locking tab in until it snaps in place
Battery positive terminal
Alternator drive belt
Tension the drive belt to 100 lbs. (used) or 135 lbs. (new)
Alternator adjustment bolt
Alternator jam nut and torque nut to 40 ft. lbs. (54 Nm)
Alternator mount bolts and torque the bolts to 40 ft. lbs. (54 Nm)
Accessory drive splash shield
Negative battery cable
Fig. Alternator mounting-2.4L engine shown
I hope helps with this (remember rated this help) Good luck.
Look an finde the belts an if you know what on looks lyke then you shoud see it but its gray an it has a belt on it an in the frount of it it has SQUAR looken hole in it
SOURCE: 2004 dodge neon sxt 2.0l do i need to do a
there is no such thing you need to time the engine correctly
SOURCE: 2004 Dodge Neon SXT, added new battery need code to reset car
if you are the original owner, look in your paperwork. if you cant get to the original owner or they dont have the info, you can go to your dealer, and they can reset it for you. and charge you
or you can just start entering codes till it works, which will take you weeks or more.
good luck
492 views
Usually answered in minutes!
×