Hi b4 renewing starter ? try this connect a jump lead to the battery negative/earth connector then the other end of lead to a suitable earth point directon engine try starting now if it works ? then problem is the batteries earth connection lead to the engine and chassis/body ? is not good or corroded/loose but by using /bypass earth direct to engine will verify this if above works as you say jump/doner battery does not work ? also check the leads/wires connected to starters solenoid are clean/secure ? this is considering age of car ?
SOURCE: 95 Acura Integra starting problem
This happened to me on a 95 Integra GSR and the entire starter did not need to be replaced, just the solenoid pieces. They get old and worn down and the plunger no longer makes a good connection with them, hence the "click". Replace the solenoid panels and sand the plunger and your good as new. You can find instructions for this on the net, just do a search for it.
631 views
Usually answered in minutes!
×