Question about 1995 Chrysler Concorde

1 Answer

95 concord wont start at times

On a 95 concorde it would stall and I could restart it and be on my way,
but now it wont start. fuel system ok-battery ok- if I crank it over to test spark I have none but I tried to start it a day later and it started. Later that same day I tried to start it and no spark, waited two days and it started I tried today and it would not start so I turned the ignition on and off and wiggled the key then it started. Whats up?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

How do i install a new ignition switch on my 95 chrys conc

Posted on Feb 19, 2010

Ad

1 Suggested Answer

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

96 concorde stalled while drivibg and wont start


I have a '96 Concorde Lxi. When that happened to me, it turned out to be the ignition switch. By the way, replacing that switch also fixed another problem that nobody (including the dealer) could figure out - the sudden and unexpected downshift at cruising speeds. Real scary!

Apr 11, 2014 | 1996 Chrysler Concorde

1 Answer

97 chrysler concorde stalled while on interstate and now won't start


First check coils and battery charge. You will have to pinpoint what the engine is missing...
- Spark
- Fuel
- Compression

All three of these are tested when the engine is being cranked over. There are two way of checking for fuel. Fuel pressure and fuel trigger. Both are very important and must be present for the engine to start. Fuel pressure is self explanatory. You just hook up the gage and see what the reading is. Fuel trigger is check with a noid light. The injector gets unplugged and the noid light gets plugged in to the injector clip. With the engine cranking over, this light must blink. This is the signal to the injectors from the computer. You can have all the fuel pressure in the world, but it wont matter if the injector is not pulsing gas into the cylinder like it should.

Compression tester, spark tester, fuel pressure gage and noid light are all accessible at your local auto store. All three tests play a very important part in diagnosing a no start condition. Be extremely careful when doing these tests.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

May 13, 2012 | 1997 Chrysler Concorde

2 Answers

1994 CONCORD NO POWER TO FUEL PUMP, NOT FIRING AND DOES TURNOVER, REPLACED CRANK SENSOR AND CAM SENSOR, TRIED DIFFERENT RELAY FOR FUEL PUMP-STILL WON'T START?


NO POWER TO FUEL PUMP......CHECK ALL IN LINE WIRING
NOT FIRING... START WITH COIL PACK, DIST CAP ETC...PLUGS/WIRES??????
"HOT WIRE" (DIRECT W/ FUSED JUMPER) TO FUEL .PUMP....NO - GO,,,BAD PUMP

Oct 09, 2011 | 1994 Chrysler Concorde

2 Answers

Ive been having trouble with my '98 chrysler concorde.it would either ''stall'' out while stopped or die out while driving.i took the car to the mechanic & they put in a cam sensor & tonight coming...


When was the last time you changed the fuel filter? when clogged, they will cause the engine to stall when stopped, or while driving. Inexpensive, if you can do it yourself, Part cost-under $15, for most cars. Won't do any harm to change it, know what I mean?

Apr 02, 2010 | 1998 Chrysler Concorde

1 Answer

94 concorde


change crank sensor? if so replace control module (ignition module)

Jul 04, 2009 | 1994 Chrysler Concorde

2 Answers

Chrysler wont start


I CHANGE CAM AND CRANK SENSOR,FUEL PUMP,COMPUTER BRAIN BOX AND COIL PACK STILL GETTING NO FIRE UNLESS I JUMP A FIRE WIRE FROM BATTERY

Jul 02, 2009 | 1994 Chrysler Concorde

Not finding what you are looking for?
1995 Chrysler Concorde Logo

283 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...