At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Step 1
Shut the Corolla's engine off and engage the emergency brake for added safety. Also, make sure its headlights are switched off.
Step 2
Open the hood using the primary and auxiliary hood release latches.
Step 3
Use a flathead screwdriver to remove the clip from the top of the air cleaner duct and pull the duct out of the engine compartment (only when changing the passenger-side headlight.)
Step 4
Turn the headlight bulb socket counterclockwise to remove it from the assembly.
Step 5
Unplug the electrical connector from the back of the bulb. Carefully dispose of the bulb to prevent it from shattering or cracking.
Step 6
Attach the electrical connector to the new bulb and insert it into the headlight assembly. Twist it clockwise to secure its position.
Step 7
Test the new headlight to make sure it works before replacing the air cleaner duct (if applicable) and closing the hood.,I hope this helps you and merry xmas
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
simple fix the headlight is halogen. simply open hood , find the back of the right headlight. there is a ring with a clip holding it from turning. hold the clip and turn the ring. pull the head light bulb out and unplug it. replace in reverse order, note here. DO NOT touch the glass part of the new bulb with your fingers. use clean gloves or tissue paper to handle it. or the new bulb will fail in a short time. When replacing the retaining ring to hold the bulb in make sure you align the notches so it will press in then turn till it locks.
sounds like the fog light is shorting out the system, and if its on the same side as the headlight, the filament in the bulb could h ave received damage also check the connections on each light, and also check the bulbs with a meter
MOST NEW CARS WENT TO AN INSERT STYLE HEADLITE! YOU CAN BUY THESE AT ANY PARTS STORE, OR WAL-MART! RAISE THE HOOD, UNPLUG THE HEADLITE, AND TWIST THEM COUNTERCLOCKWISE TO REMOVE THEM!
Hi sheikq, To answer ur question, U can find a headlite at ur dealer but the cost will be higher. Pepboys, autozone, Napa, etc. are shops that should carry headlites for most cars. If you have a problem finding one, go on the net an do a search at Google, say Headlite for UR car type then hit submit. Should be able to find something there or a place that you could call to find out they had the lite.
It sounds to me that if you checked all the fuses and they are fine that it could be the headlight switch needs to be replaced or very uncommon but possible that both low beam bulbs blew at the same time and need replacement.
You need to go to autozone parts store and have the battery and altanator tested with lights on and blinkers on to see if you have a low voltage problem both could cause this condtion.
some times there is an aditional swich to get the light down look very well but if not these systems are very complicate they have a lot of relays i will recomend you to take it to an auto electrical facility
compartment (only when changing the passenger-side headlight.)
×