SOURCE: broken tailgate latch
Remove the paneling from inside. Than you can use a flathead screwdriver to pry the latch rod and latch enough to pop open the door.
SOURCE: tailgate latch broken
You can pull the panle off with your hand from the inside of your van but becareful because those clip that holds the panel are very easy to break, once off you ll see where the latch located there is an opening for you to open. Hope this help and good luck.
SOURCE: can't open tailgate and rear window
if you take off interior panel.....push out the dent with a bar....then try button if no work go back inside and you should see bars going down from handle to latch area...pull up on it and should pop the trunk
SOURCE: the tailgate latch on our 2006 Chevy truck is in the open positio
Pull the black plastic plate from arond the handle stuck with double sided tape. The rod that was attached to the handle will be lose inside hard to get to (the connector is made of plastic) . Take both peces to a auto parts house ask for carberator link clips usally in the Help section.Replace both clips while you ars at it, you won't have to do it all over again like i did.
SOURCE: Tailgate on 96runner won't 0pen. Window works,
You are gonna have to remove the interior panel, and with pliers, open the hatch...either the clip is broken on the handle or the handle itself is broken.
862 views
Usually answered in minutes!
×