Chevy truck way to reset oil service indicator.

When you disconnect the battery, you have to reset the security system and the engine immobilizer.

https://www.google.com/search?q=2007+Chevy+Malibu+LS+reset+security

How do I reset my 2007 chevy malibu anti theft?

Vehicle History https://www.vehiclehistory.com > questions > how-do-...
To reset the anti theft in a 2007 chevy malibu you will need to unlock the door with the fob, press the door lock button on the door, then close the door. Like.

4 answers · Top answer: In order to reset the anti theft system on Your 2007 Chevy Malibu You'll first need to put the key in the ignition and move it in to the on position. ...

How do i perform a chevy malibu security reset?

Vehicle History https://www.vehiclehistory.com > questions > how-do-...
First, park the car and make sure all doors are shut and locked. Then, slot in Your key into the driver side door and unlock the car. ..

It is worth checking the simple silly stuff first. Check all of the doors and trunk are closed properly. Are you or a passenger sitting without your seat belt fastened? Do you have something heavy on one of the seats? I had a large sack of potatoes on the passenger seat that triggered the seat belt warning beep. Took me 10 minutes to figure that one out! If yours has parking sensors are you parked close to a wall or high kerb that it's detecting? Some 'electric' park brakes have warning tones if they are in the wrong position when trying to drive.
Are there any warning lights on the dashboard? These can give clues to what the problem is.

sensor is out in the seat belt harness

hi..

well first of all it means that u have a problem some where on the suv the only way to find the problem is to hook a diagnostic computer and see what the code is u will have to take the car to a shop who works on isuzu and im sure they can tell u what code it is and whats wrong or u can take the suv to advance auto parts and they can hook there machine to it for free and tell u the code good luck

OK, the best action now would be to scan the ecu for any trouble codes that may be stored at this point with a diagnostic computer. this action will describe the issue concerning the check engine light and, it will also direct you to the location of the failed sensor that may be damaged at this time.

In most cases, this light will illuminate if a vital sensor has failed to register a signal for a short time or, if the sensor circuit is open.

thank u
rate me!!

you have short between the radio and the interior light.
you need to get a diagram of the electric system and trace it out.
if you pull the fuse for the interior light, and run the CD what happen?