LOCATE ORIFICE TUBE - 1998 Ford Expedition

Fortunately Google knows what an 'orcliffie' is :>D

Where can I find the orifice tube on my AC? - DODGE RAM ...

https://www.ramforum.com > ... > Interior
Sept 3, 2021 - 2008 Ram Hemi, fixing to put in a seal kit and do a recharge on the AC system. Anyone know where to find the orifice tube location?

97 Ram 1500 A/C Orifice Tube Location - DodgeForum.com

https://dodgeforum.com > ... > 2nd Gen Ram Tech
Jan 16, 2017 - It should be the bulge in the skinny line that goes to your condenser. Open the hood and loo on the passenger side front. You have to replace ...

• 
  

  Orifice tube location - DodgeForum.com

  https://dodgeforum.com > ... > 3rd Gen Ram Tech
  I cant find my orifice tube location a 2007 dodge ram 1500 with a 4.7 engine. Might be better to put this in the 3rd gen Ram forum instead of 2nd gen Dakota.

Dodge Ram 1500 A/C Orifice Tube - AutoZone Auto Parts

https://www.autozone.com > ... > Air Conditioning
Results 1 - 10 of 10 - Order Dodge Ram 1500 A/C Orifice Tube online today. Free Same Day Store Pickup. Check out free battery charging and engine diagnostic ...

The orifice tube is inside the tubing of the A/C. Most likely in the bottom tube that comes out of the firewall.

for step by step details with location and diagrams click the link below:

https://fexya.blogspot.com/2021/06/orifice-tube-location-on-91-chevy.html

this will help.Thanks.

Terry,I think its in the evaporator, some times in one of the condenser lines, Check the attached links,
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

ORIFICE TUBE LOCATION please help

How to properly install an Orifice Tube

AC Drier and Orifice Tube

Sonoma Orifice Tube Best Orifice Tube Parts for GMC Sonoma

1. 2006 MERCURY MOUNTAINEER A/C Orifice Tube

   www.rockauto.com/catalog/x,carcode,1432274,parttype,69362006 MERCURY MOUNTAINEER A/C Orifice Tube - RockAuto. ... 2006 MERCURY MOUNTAINEER 4.0L V6 : Heat & Air Conditioning : A/C Orifice Tube, Price ...

The orifice tube is located in the evaporator inlet pipe at the liquid line connection. The evaporator is located in the right rear side of the engine compartment. .

How do I remove the orifice tube without damaging my evaporator core

The orifice tube is located inside the liquid line where it connects to the condenser. This line is located on the passenger side of the car and has the low side charge port on it. this line unscrews right where the orifice tube is located... Hope this helps

HI, this system only uses the one orifice tube. What made you think the orifce tube was causing your system not to blow cold air?

The orifice tube restricts the flow of refrigerant to the evaporator. This restriction allows high pressure liquid freon to change into low pressure freon before entering the evaporator. The orifice tube is located inside the hose running between the condenser and the evaporator. You'll need an orifice tube removal kit if you are looking to remove it.

it's in the high pressure liquid line.

A/C Evaporator Core Orifice The A/C evaporator core orifice (19D990) should be replaced whenever the A/C compressor (19703) is replaced for lack of performance (internal damage). The A/C evaporator core orifice, located in the condenser to evaporator tube (19835), cannot be serviced in detail as a component of the line. If replacement is necessary, follow the procedure outlined for Liquid Line Removal and Installation. An orifice tube replacement service kit may be used as an optional service procedure. Refer to Section 12-00 for information regarding the use of an A/C Evaporator Core Orifice Replacement Kit E5VY-19D695-A.
-----------------------------------------------------------------------------------
A/C Evaporator Core Orifice Replacement Kit Installation

1. Discharge A/C refrigerant system. Refer to System Discharging and Recovery as outlined.
   

1. Remove condenser to evaporator tube (19835) from vehicle.
   

1. Locate A/C evaporator core orifice (19D990) by three indentations or a circular recess in metal portion of the condenser to evaporator tube.
   
   
   A/C Evaporator Core Orifice Location
   

1. Note angular position of ends of condenser to evaporator tube so that it can be reassembled in correct position.
   

1. Cut a 63.5 mm (2.5 inch) section from condenser to evaporator tube at A/C evaporator core orifice location. Do not cut closer than 25.4 mm (1 inch) from start of a bend in tube.
   
   
   A/C Evaporator Core Orifice Section Removed From the Liquid Line
   

1. Remove contaminants from the two pieces of the condenser to evaporator tube.
   

1. NOTE: The inlet half of the condenser to evaporator tube will be positioned against the A/C evaporator core orifice tabs when correctly assembled.
   
   Lubricate fitting with clean refrigerant oil and assemble orifice tube kit (with A/C evaporator core orifice installed) to condenser to evaporator tube. Make sure flow direction arrow is pointing toward evaporator end of the condenser to evaporator tube, and taper of each compressor ring is toward compression nut.
   
   
   A/C Evaporator Core Orifice Kit Disassembled Components