2007 Kia Rondo LX V6 Logo
Posted on Dec 14, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

KIA RONDO FLAT TIRE LIGHT STAYS ON CHECH TIRES PRESURER IS GOOD

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 11 Answers
  • Posted on Dec 15, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Dec 14, 2009
Answers
11
Questions
2
Helped
1709
Points
21

Take it to tire shop have them use the tool to reset the sensors inside the tires. the sensors tell the computer when one tire is low.

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

  • Master 869 Answers
  • Posted on Dec 22, 2010
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Joined: Dec 19, 2010
Answers
869
Questions
2
Helped
784996
Points
1021

You need to check the sensors in the tire..also there can be an issue with the display..get it checked by an authorised service station..

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

2004 kia sorento ex front sounds like running on a flat tire

have you had tyre balance checked? have you a leaking / failed front shock?
0helpful
1answer

Tpms warning light on dash board mean

the tire pressure in the tires is too different form tire to tire on car. Your car has a tire going flat.
0helpful
1answer

I have problem with my TPMS (KIA RONDO)2007 SENSORS

If you look in your manual, there is usually a procedure for resetting TPMS sensors. They can be as silly as turning off and on the headlights 3 times or honking the horn with the key turned to the on position. If you can't find it in there the dealer will have a tool to reset it for you.
0helpful
1answer

How do i release the spare tire from under the kia rondo?

The spare tire is located under the car just in front of the rear bumper. Here's how to remove it:
1. There should be a liftgate on top, open it then locate the U-shaped slits in the carpet and then remove the carpet, and you will see the hex nut
2. Use a lug nut wrench to unwind the hex nut
3. Turn counterclockwise until the tire is lowered to the floor below
4. Remove the retainer, and that is it
1helpful
1answer

My Kia Spectra just had a light come on. It looks

If it looks like exclamation point with two parenthesis on each side that is that you either have a low tire pressure or a flat tire. Take it to place so they can check your tires. Good luck.
1helpful
1answer

My t.p.m.s. light continually stays on.odometer won't go off

The dealer should test all the sensors to know is they are work well in clude the sensor in spare tire. And make sure the tires are good the tire pressure are OK. If there are more than one sensors are fault but only one was replaced. the light will still keep falshing.
2helpful
2answers

Warning light with a tire and an explanation mark

you have sensors in each tire that warns you of lower tire pressure just put some air in your tires to specs and the light should go out.
4helpful
2answers

Change front rotors kia rondo 2007

Remove the tire, remove the brake calipers, 2 bolts on back side of rotor, remove the carter pin that retains the bolt position if equiped, remove the center nut. When you pull the rotor off watch for a set of bearings to drop out. To install the new rotor reverse the process.
2helpful
4answers
Not finding what you are looking for?

358 views

Ask a Question

Usually answered in minutes!

Top Kia Experts

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...