As wierd as this sounds, where the door meets the car at the rubber seal, rub canola oil or some kind of cooking oil, it does not freeze and the door will not stick to the car. Another problem can be that the check strap, the little strap (usually looks like a little metal bar that comes out the front edge of the door between the two hinges) gets sticky. White grease can help that sometimes.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Should be a label at the driver door opening telling you what tire size to use and what the 'cold' tire pressure should be. Open the driver door..look at the door opening area.
? 0:19 www.youtube.com/watch?v=xHX6Up7HCfs Jul 2, 2006 - Uploaded by SadieSummer
How to drill open a honda door that's stuck or won't open (no real info on .... How To Install Replace Broken Rear Outside DoorHandle 1996-00 ...
? 9:52 https://www.youtube.com/watch?v=bUV6BZfVxDY
Jun 15, 2011 - Uploaded by 1A Auto Parts
How to Open a Honda Door that's STUCK! ... How To Install Replace Broken Rear Outside Door Handle 1996-00 Honda Civic - Duration: 5:47.
Honda Passport driver door lock stuck Questions & Answers ...
www.fixya.com > ... > driver door lock stuck > Cars & Trucks > Honda Honda Passport cars & trucks driver door lock stuck questions and answers. Ask your ... 1996 honda passport defrost has stopped working ... dash vent ... Back seat doorsdo not open ... stuck. Any ideas of how to get them to open? It seems that ...
you may need them to come back to give you a jump start or[boost] to your battery to start the car. the battery may be dead due to the cold temps. recall AAA and ask them to boost your car to start it. you are not the only person this has happened to during the cold months! suggest you have your battery checked at autozone or an advanced auto for free! it may have a dead cell in it!thank you for choosing fixya.com we are here to assist you anytime!
part of the problem with being in such a cold place is even tho its so cold there is still moisture in the air. if you door wont close or open, you need to check the latch out and make sure its not just bent. as for not being able to unlock you door. the latching system is connected to the lock and handle. if the latch wont move don't use wd-40 that will make it worse. you need to pull open the door panel and get it greased with a grease gun. wd-40 will not keep the parts moving in that kind of cold. if latch wont reset when you get it open, it wont close. just grease it up. oh it would help if you get water guard for your windows. protect you parts from freezing. take care.
make sure the door handle on the outside has returned to normal position, sometimes the cold will make them stick. The door opens but the outside handle sticks open and the door won't latch. Hope this helps.
there is an actuator for the drivers side heater that opens the temp door. this motor actuator needs changing. so it is stuck in heat mode and now motor will not move door to cold.
I agree, these vehicles have a problem with the blend doors and since the accuators hit the door when it opens and closes, it breaks the doors. and it's a huge job to replace them.
.
Power Door Lock Operation (Front Doors)
The front doors do not have traditional door lock actuators. They have electronically controlled door latches that will operate depending on the status of the door lock system. This status is determined by the front door modules and the last known state of the lock system. If the last known state is LOCK, the latches will not release when the door handles are operated. If the last known state is UNLOCK, the latches will release when the door handles are operated. The front doors are also equipped with red door lock status indicators. The front door modules will supply power and ground to the indicators to illuminate them when the lock system is in a virtual state of lock. The indicators will not continuously illuminate when the vehicle is locked. They will illuminate for approximately 5 seconds after a lock switch activation or after a door handle has been operated and the front door modules are in a virtual state of lock. For further information on the front door latches, refer to Power Door Latch Description and Operation .
I would assume they check for DTC'S - diagnostic trouble codes ?
DTC B3062 Front Door Key Lock Switch Circuit
ā¢ DTC B3067 Front Door Key Unlock Switch Circuit
DTC B3849 Exterior Door Handle Switch Circuit
The left front exterior door handle and right front exterior door handle switch signal circuits provide inputs to the driver door module (DDM) and passenger door module (PDM) when an exterior door handle switch is activated. These inputs allow the door module to detect a door open request. The door modules provide voltage to the door handle switches. If the door module detects that a ground is applied for greater than 30 seconds continuously, a DTC is set and the door module will ignore the door handle switch input.
Free wiring diagrams here http://www.bbbind.com/free_tsb.html
Enter vehicle info. year , make , model and engine size . Under system click body & accesories .Then under subsystem click power locks . Click the search button then the blue links
×