My headlights on my 2000 Monte Carlo do not work, My high beams work, day running lights work, Blinker and hazards work. Just not my low Beams. I checked the fuses and relays. Still not working
Day time running lights run low voltage to the high beam bulbs so it sounds to me like you need two new bulbs or you need to check the fuses and see if any need replaceing.
Have you check the low beam lights themselves?If so follow the wires from the lights to the fuse box thats under the hood..They usually break there or turn green from being wet..Get a test light and on the low beam wire positive side probe the wire and follow it to the fuse box and that should help you find the problem..Have A Great Day!!!
I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_a3369546f8067589
My problem is my daytime lights wont work.. its a 2000 monte carlo ss
Good afternoon my peeps
Dis is waundon Carlo I had headlight problems jus recently. My passenger headlight along with the high beam. Man I thought this gnna b a 5 min fix. I changed the harness that didn't wrk so I bought a new bulb and It was still dim. I checked my dash and the sensor read high beam out very frustrating. To make a long story short something told me to check the fuse box under the hood and viola I found a 10 fuse that was blown and I spent about 30 bucks in accessories and all along It was a ten cent fuse.. I felt like ****.. But the problem is fixed so ALL U MC RYDER'S... CHECK ALL YA FUSES it will save some bucks trust me!.
4,752 views
Usually answered in minutes!
I actually already replaced the low beams and still not working. I also checked the voltage on the socket of those lights because the High beams and low beams are seprate and the volts is only 1.5
×