-
Ford Master
2,993 Answers
- Posted on Dec 06, 2009
Re: 2001 ford focus zx3 starter replacement instructions
2.0L DOHC Engine
-
Before servicing the vehicle, refer to the Precautions section.
-
Remove or disconnect the following:
-
Negative battery cable
-
Air cleaner outlet tube
-
Lower starter motor bolt
-
Two starter motor upper bolts
-
Slide the starter motor from its mounting until you can gain access to the wiring.
-
Integral connector
-
Starter motor
To install:
-
Install or connect the following:
-
Integral connector and tighten the retaining nuts to 61 inch lbs. (7 Nm)
Starter motor to its mounting
Two starter motor upper bolts and tighten to 15–20 ft. lbs. (20–27 Nm)
Lower starter motor bolt and tighten to 15–20 ft. lbs. (20–27 Nm)
Air cleaner outlet tube
Negative battery cable
×