Open the glove box, remove all contents, and locate the stops on each side near the top of the glove box.
While holding the glove box cover, remove the two glove box stops by gently pressing them from the outside. After the stops have been removed, let the cover hang down and out of the way.
Remove the filter lid from the blower unit by depressing the clip on the left side of the lid to release.
Pull out the first filter. Slide the second filter to the left and pull it out.
Remove each filter from the filter housings and replace with new filter. Make sure that the "air flow" arrows on the filter elements are pointing in the same direction as the arrows on the filter housings.
Install the new filters in the blower unit and reinstall glove box stops.
Hope this gets you there.
343 views
Usually answered in minutes!
×