Has to be reprogrammed by a land rover dealer
SOURCE: How do i programme a new remote fob for my 98 R Freelander
Programming a new Key
Replacing a missing master key is quite expensive from Land Rover, try not to get sucked into the extra cost of "Dealer coding" You can do this yourself in 2 minutes by following the simple process below.
1) Get in and close all doors. Turn ignition on and off quickly and remove the key (all within about 5 seconds).
2) Within 30 seconds of turning the ignition off, while holding down the "unlock" button, press the "lock" button three times. Release the "unlock" button. (You may or may not get the confirmation from the door locks.) Holding the key at your head level provides best results as the key sensor is in the side window pillar.
3) Repeat for each key you want to initialize within 30 seconds after the last one you initialized (if you have more).
4) Right after doing the last key, quickly put the key back in the ignition and turn it on/off again to finalize.
SOURCE: 03 Freelander Key Fob needs Programming
Hi, as far as I know it is not possible to this yourself,
they cost £60 to get done from an independent decoder.
if you get both done ask for discount example £90 for 2.
Some decoders will come to you and do it so shop around for the best deal.
Regards
Dan
Testimonial: "Thanks DanniBoi! "
894 views
Usually answered in minutes!
×