How do i install a door handle on a 1997 gmc sierra 1500

SOURCE: How do you install an inside door handle on a 1997

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can put the new handle in and reconnect everything

SOURCE: 1997 GMC 5.0 litre 1500 sierra fuel pump hums all

That's a posibility!

Test fuel pump pressure, if it is low or doesn't hold up, change it before quits.

Also, check the fuel pump relay, it could be stucked.

Good Luck

SOURCE: extra cab door won't open

remove inner door panel & check linkage to lower latch. if connected then watch linkage while moving handle, if linkage seems to bow or bend then lower lacth is frozen & needs to be replaced.