2003 Nissan 350Z Logo

Related Topics:

Posted on Nov 28, 2009

My power seat won't work on my nissan 350z.

My power seat won't work on my 2003 nissan 350z.

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 1 Answer
  • Posted on Nov 28, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Nov 28, 2009
Answers
1
Questions
0
Helped
2022
Points
6

It it most likely a blown fuse

  • Anonymous Aug 29, 2012

    the fuse(s) are good.. its a few of the bulbs are burned out from time..

×

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Aug 29, 2012
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Sep 25, 2008
Answers
1
Questions
2
Helped
2022
Points
1

I have a 2003 Nissan 350Z Touring edition, when I bought my car a few months ago, I havd to unplug the switches from under the seats, then use an angle phillips screwdriver, to remove the switch, and take it apart and clean all the debri from over the years(bad design by Nissan to have these switches in these positions) re-assemble the switch and reinstall it on the side of the seats, and plug in the harness under the seat(s) and you should be good to go..Hope this helps you, it sure helped me..Jimmy..

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

2003 nissan 350z. Passenger door electric locks only unlock half way. Problem is I can get door panel off being door is shut and cant open from outside/inside.....What now lol

Remove the front seat can give you access to remove the panel. But if it has screws around the outer perimeter, most likely will have to tear it out. Best to find a replacement first. Look at the drivers door, if it has screws, so does the passenger side. There are screws around the arm rest and door handle to remove, then it pops off. Again the seat has to be out of the way.
0helpful
1answer

Location of fuel cutoff switch in a 2003 nissan 350z

There is no fuel cut off switch. The electric fuel pump only operates for a few seconds when the ignition is switched on and will only remain on when the engine has been started. If the engine is not started and the ignition is left on the computer will cut power to the pump.

If you want to cut all power to the fuel pump you have to remove the fuse for the pump or remove the relay that covers the power circuit to the fuel pump.
1helpful
1answer

My passenger door switches stopped working on my 2003 350z

Hi Randall, it appears that no one has answered your question, get back to me if you still need help. Stay safe Greg.
1helpful
1answer

How to replace bad bulbs in a 2003 nissan 350 instrument cluster?

you have to remove most of the dash then remove cluster from dash they attach threough rear of board
0helpful
1answer
1helpful
2answers

My nissan 350z sometimes stalls after starting

after i replaced the battery in my 2003 350z, it would stall immediatly after i cranked it on unless i gave it a little gas. I fixed this by cleaning the MAF and throtle body valve. Total supply costs were $15 and took about 20 minutes. My Z is not only fixed but runs smoother and cleaner.
0helpful
1answer

2003 350z, my gauge cluster

if its not the wiring, it may be the fuses...check all your fuses
1helpful
1answer

2008 350Z wheels on a 2003 350Z

I also have a 350z...what exactly are you drying to do?
Not finding what you are looking for?

2,032 views

Ask a Question

Usually answered in minutes!

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...