Is this the headlight bulb replacement or headlight (assembly) replacement? For bulb replacement:
1. Disconnect negative side of battery.
2. Open hood.
3. Reach behind the neadlight assembly and disconnect the wiring connectors.
4. There is a locking ring around the back of the headlight assembly. Turn this counterclockwise.
5. Gently pull out the bulb.
6. Insert new bulb into the locking ring.
7. Place these back onto back opening and turn clockwise making sure it is flush and totally engaged.
8. Replug wiring connector.
9. Reconnect negative side of battery.
10. LIGHTS!!
I take based upon your rating that it was the headlight assembly and not the bulb? For headlight housing removal here is the following:
1. Disconnect the negative side of battery.
2. WAIT AT LEAST 2-MINUTES for the Air Bag System to de-energize! If not BOOM - Airbag Deployment!
3. Remove the Radiator Grille:
a. Remove the grille mounting screws
b. Detach the bottom clips
c. Remove Grille.
4. Grasp the lower edge of the headlight assembly and detach it from the lower pivots.
5. Grasp the top edge of the headlight assembly and detach it from the upper pivots.
6. Disconnect the wiring connectors.
Installation is reverse of removal.
Good Luck and let me know if this worked. Also if a solution has not met your needs, Add a Comment and click on "Add Comments". You do not have to accept the answer, just add the comment. I will receive the comment and can respond to further help you. As I questioned in the original problem: I did not know if you needed bulb removal or assembly removal.
×
580 views
Usually answered in minutes!
×