Need a wiring diagram for a chevy s10. brake lights quit
Your power starts at the brake light fuse,check with a test light,then proceed to stop light switch on brake pedal under dash,one wire will be hot when when you check it with your test light, the other won't be until you press down the brake pedal then the power flows through to the second wire,if no power to second wire replace switch,if you have power remove tail light bulbs and check for power in side socket.
97 s10 2.2 running rough cut out at driving speed. replaced fuel filter,air filter plugs,wires. idoles fine. only cuts out occasionally. shows p300 code
7,244 views
Usually answered in minutes!
×