1995 Cadillac DeVille Logo
Posted on Nov 23, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

I need new front struts, back air shocks, and a engine mount

I need new front struts, back air shocks, and a new engine mount. How much will that cost without labor, and how much are each part for my 1995 Cadillac sedan deville

5 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 18 Answers
  • Posted on Jul 15, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Jul 09, 2010
Answers
18
Questions
0
Helped
18414
Points
31

If you are looking to replace the shocks on this Deville, you could be looking at a price that you may not like. With all the different components to the air ride system it is a good idea to go with a conversion kit that allows you to get away from the air all together by using a coil spring conversion. Strutmasters offers great kits at a great price with a lifetime warranty. I would rather pay half the price to fix my car and have the parts be warranted than buy expensive parts for the car not knowing its going to fix the problem and have no warranty with it. Check them out!

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Guru:

An expert who has written 7 tips or uploaded 3 video tips

  • Master 382 Answers
  • Posted on Dec 08, 2009
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Guru:

An expert who has written 7 tips or uploaded 3 video tips

Joined: Dec 07, 2009
Answers
382
Questions
0
Helped
125214
Points
1079

If you need to replace shocks I would recommend this site. Most of their shocks and struts come with a lifetime warranty and they will give you step by step instructions on how to install their parts. Also, you can remove the air ride bags from youre vehicle and replace them with a conversion kit for just a fraction of the cost of air ride bags.

Ad

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Aug 08, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Aug 08, 2010
Answers
1
Questions
0
Helped
421
Points
1

I need an a/c compressor for my 1995 cadillac deville. I need to know is it going to be a difficult task to do my self and if so where is a good place to take it. I found a used compressor and not many places will do the job with me coming in with a used compressor. I also am having trouble with my traction light and ABS light being on. The traction turns off within 100ft of me driving. It makes this noise, like a grinding and then the brakes compress and the traction turns of and the lights come on. What should I do?























































































































Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Brigadier General:

An expert that has over 10,000 points.

  • Master 7,353 Answers
  • Posted on Nov 23, 2009
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Brigadier General:

An expert that has over 10,000 points.

Joined: Sep 17, 2009
Answers
7353
Questions
1
Helped
2485802
Points
23804

Call any parts store. Most auto shops will not install customer parts, if they do, your're really not saving any money, plus there will be NO WARRANTY.

Harvey N Tawatao

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Cadillac Master 3,854 Answers
  • Posted on Nov 23, 2009
Harvey N Tawatao
Cadillac Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Apr 05, 2009
Answers
3854
Questions
0
Helped
2795250
Points
16501

If there is an Auto Zone around you area you can go there and get a price with the step by step instructions to get the job done you self. You can also Log on to AutoZone.com and you can get the price there your looking for and i believe you can also look up the step by step instructions. Good luck

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Ok on this same car 2005 in the front end are there shocks or struts cause it drives really well but when I go over a bump it's makes like a sound thud an one more question how much for the front end

Not enough information to answer. Need manufacturer, year, model, and engine size in order to answer the question. That said, most late model cars use struts. Cost can vary by model and type of strut. Also, if strut mounts need replacement, they add to the cost. Labor varies based upon vehicle type. Front end alignment must accomplished after strut replacement on most vehicles. At a US shop, figure a minimum of $500.00 for parts and labor.
tip

When should I replace my shocks and or struts When a vehicle is brought into an...

When should I replace my shocks and or struts
When a vehicle is brought into an auto repair shop for routine vehicle maintenance, the auto technician may suggest that the vehicle shocks or struts need to be replaced. Learn the function of a car or trucks shocks and struts. Find out why the shocks and struts need to be replaced and how someone can tell if they’re bad.

The Purpose or Function of a Cars Shocks and Struts

Shocks and struts serve the same purpose. They’re main function is to keep the vehicle from bouncing. A vehicle has front and rear springs to cushion the vehicle over rough road conditions. If there were no shocks or struts the vehicle would continue to bounce excessively. The shocks and struts prevent the car from bouncing by damping the springs.

What’s the Difference Between Shocks and Struts?

Shocks are usually used to dampen leaf springs, where as a strut is used to dampen coil springs. Shocks are usually a single cylinder in the open where as a strut is normally surrounded by the coil spring and are more massive and complicated.

That’s why struts normally cost a lot more to replace than a shock. On a car the front suspension usually has struts and the rear usually has shocks. Some trucks have shocks on the front and rear. Other than those distinctions, shocks and struts serve exactly the same purpose.

Why Should the Cars Shocks or Struts be replaced?

Keeping in mind that the purpose of shocks and struts is to keep the vehicle from bouncing, the following is some of the reasons why they should be replaced.

* An excessively bouncing car can be an uncomfortable driving experience.
* The vehicle can be harder to control leading to an unsafe condition.
* Excessive strain can be put on other vehicle components causing premature failure.
* Bad shocks or struts will cause the tires to bounce and create spotty or choppy wear on the vehicles tires.

How to Tell if a Cars Shocks or Struts are Bad

1. Shocks and struts can be oil or air filled. If they are leaking oil or air they need to be replaced. Consumer beware, some dishonest auto repair shops will squirt oil on the shocks, show the customer the leaky shocks and tell them they need to be replaced.
2. Another method is the bounce test. Put all your weight on the front or rear of the vehicle and push down on the vehicle. Let go of the vehicle and stand back to see of it bounces. If the vehicle comes back up without bouncing, the shocks are probably in good shape. If the vehicle bounces a few times, chances are the shocks or struts need to be replaced.

Shocks and struts are wear items, not maintenance items. There’s no set mileage or time limit when they should be replaced. If the tires seem to have a choppy wear pattern or the vehicle bounces excessively over bumps, the shocks need to be checked.

Look at the struts or shocks and see if they’re leaking. Perform the bounce test and see if the vehicle bounces. Replacing the vehicle shocks and struts when they’re bad will create a safer and more comfortable driving experience, not to mention saving money in the long run.
0helpful
2answers

Where do I find air shocks or air struts for my 90 Buick riviera and which one do I have I'm so confused

i'm not sure that you have "air " shocks or struts , follow this link to an automotive parts site , put in your vehicle details and it will show exactly the type of suspension components you require
Replacement Parts Car Parts and Truck Parts
0helpful
1answer

How do I chnage the front and rear shocks in a 2001 4.0

The shocks in the rear just unbolt top and bottom, disconnect the air line and replace them.

Struts are used in the front. You'll need to remove them and then have a spring compressor to change the struts. An alignment check is recommended after the struts are replaced.
5helpful
2answers

Are struts on the front or back of this car?

The struts model (MacPherson Strut),are both in front and back of this car.
2000 - 2006 Hyundai Elantra Shock Absorber and Strut Assembly - Rear, Driver Side, KYB GR-2/EXCEL-G, Twin tube, Strut Assembly. $72
2000 - 2006 Hyundai Elantra Shock Absorber and Strut Assembly - Rear, Passenger Side, KYB GR-2/EXCEL-G, Twin tube, Strut Assembly $68
1996 - 2006 Hyundai Elantra Shock Absorber and Strut Assembly - Front, Driver Side, KYB GR-2/EXCEL-G, Twin tube, Strut Assembly $67
1996 - 2006 Hyundai Elantra Shock Absorber and Strut Assembly - Front, Passenger Side, KYB GR-2/EXCEL-G, Twin tube, Strut Assembly $63
Of course this is only the cartridge, you have to transfer the spring, and the top mount of the existing strut. You need a pair of coil spring compressor to do the job. The basic procedure to replace a strut is:
Remove the top nuts that secure the strut assembly to the frame mount inside the engine compartment. Do not remove the center nut.
Mark the lower strut mounting location on the hub for installation reference. The alignment will be close if the new strut is installed in the same position.
Remove the bolts that hold the strut assembly to the hub.
Remove the strut assembly from the vehicle.
Mark the top mount for installation reference. Using a side mounted spring compressor, compress the spring and remove the top nut and retaining washer. Pull strut assembly out from the bottom of spring.
Slide the new strut assembly up into the spring and reposition the top mount onto the spring in the same position that it was removed. Install the retaining washer and top nut.
Tighten the top nut to the manufacturer's specifications and carefully remove the spring compressor.
Place the strut assembly back into the vehicle.
0helpful
1answer

How to change Front shocks on a jetta

You'll need to unbolt the top of the strut and the bottom of the strut at the steering knuckle. You'll need a spring compressor to compress the spring before seperating the strut from the strut mount and spring. You may want to replace the strut mount also. MAKE SURE THE SPRING IS COMPRESSED ENOUGH BEFORE REMOVING THE TOP STRUT MOUNT!!!!
3helpful
1answer

How do I replace the struts and shocks

well the rear are easy take the wheel off,,,put a jack under the rear axle on the side you are doing and put tension on the jack to jack it up alittle,remove the 21mm lower shock bolt and the 18mm top shock bolt and release the jack,then remove shock and reinstall new,,,they are easy do the same fo rthe other side and then go to the front,,,take off wheel,,, no jacking up required for front struts,,,remove the two 18mm nuts and bolts that connect the strut to hub and then 18mm nut the holds the sway bar end link to strut,,may may need a vise grip on the back side of the end link to hold it from spinning as they rust fast,then open the hood and hold the strut with one hand thru the wheel well and take the top strut mount nut off under the hood 18mm,watch because the strut will fall in the wheel well so hold it,i would advise using a air gun to do this all other wise youre gonna have a hard time to remove the sway bar end link nuts
1helpful
1answer

Removed old strut last night Today can't get new

Installation
  1. sww~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: The bearing and seal assembly is press-fit onto the upper mount. The mount washers must be installed in the correct orientation.
    NOTE: Be sure to check the spring insulator for damage before assembly. If the outer metal splash shield is bent or damaged, it must be carefully bent back, so it does not touch the locator on the bearing and seal assembly.

    NOTE: New gas struts are shipped with the rod in a locked down position. To extend the new strut, remove the external tie down and/or rotate the upper end of the rod, counterclockwise.

    Install the coil spring insulator, coil spring, and upper mounting parts to the new strut assembly. Make sure the spring is correctly seated in both spring seats.


a1048fe.gif


Item Part Number Description 1 — Dust Boot (Part of 18045) 2 N803826-S100 Front Shock Absorber Mounting Bracket Nut
(3 Req'd) 3 N803952-S100 Washer 4 N808625-S100 Front Shock Absorber Nut 5 18183 Front Shock Absorber Mounting Bracket 6 3B455 Front Suspension Bearing and Seal 7 5310 Front Coil Spring 8 5414 Front Spring Insulator 9 18045 Front Shock Absorber A — Tighten to 35-40 Nm
(25-30 Lb-Ft) B — Tighten to 55-63 Nm
(40-46 Lb-Ft)
  1. sww~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Do not over tighten the lock nut; damage to the lock nut or piston rod could result.
    Install new rod lock nut and tighten it to 55-63 Nm (40-46 lb-ft).




  1. Remove the spring compressing tool.
  1. Position the strut assembly into the vehicle. Install the three mount-to-strut tower nuts. Tighten the nuts to 35-40 Nm (25-30 lb-ft).




  1. Partially raise the hoist.
  1. Position the strut assembly to the steering knuckle. Install the pinch bolt and tighten it to 115-132 Nm (85-97 lb-ft).
  1. Position the stabilizer link to the strut assembly and install the retaining nut. Tighten the nut to 90-100 Nm (66-74 lb-ft).




  1. Install the front wheel and tire assembly.
  1. Lower the vehicle.
8helpful
3answers

2000 Buick LeSabre Struts

Yes there are struts on the front and shocks on the back. 2 of each. They are around $50-100 for the fronts. $30-100 for the rears depending if the car has air ride or not.
Not finding what you are looking for?

431 views

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...