One of the door/van loading door switches has failed it thinks a door is open so the the interior light stays on and the door open warning will ding the interior light should have a switch to disable it or take out the bulb but you cant stop the dinging until you find the faulty latch switch and fix it
SOURCE: door ajar light & washer fluid light & bell dings,
sound like your fluid sensor may be stuck or bad if light stays on try tapping the washer motor on the resevoir if it goes out faulty sensor as for the door ajar light it might have bad connection with sensor saying the door is closed local dealer should be able to troubleshoot sensor
SOURCE: interior lights will not go off panel light
spray all door latches with a good penatrating oil spray alot in the laches slam the doors servral times thier is a switch in the latch that gets stuck it is replaceable but is hard to get at
SOURCE: annoying alarm dinging until van reaches 17mph
This means one of the door ajar sensors is stuck. You need to remove the door trim panel and then the latch and then the sensor. Once out clean and lube it. There is a sensor inside every door.
SOURCE: My 95 Ford Windstar has
one of the door ajar switches are sticking. needs to be put on the computer to find out which one. only other way is to go around and unplug the switches until your light shuts off.
210 views
Usually answered in minutes!
×