We had the interior fuse block replaced a couple of weeks ago on our ambulance which is a 2008 f-350 with the 6.4 diesel and now the dome light flashes whenver the ignition is in the "run" position. It did not do this at first. Any ideas as to the cause?
Had an issue with my interior dome lights and truck bed lights flickering in my 2006 F250 Superduty. Door chime was also going off without the key in the ignition. The problem started draining my batteries. A long process to troubleshoot.
The problem was the instrument cluster. My mechanic said, he never experienced this issue. Truck runs brand new now
Got my cluster from Circuit Board Medics. Almost got rid of the truck, but now I'm rolling again.
Check all fuses one might have blown and this could be a warning sign in the old days if you blew out the tail lights the interior light would come on and the signal indicator for which bulbs but also buy the electrical manual available from ford and search out the wiring there could be a jumped circuit
SOURCE: 2007 chrysler town and country interior dome lights
if it is covered by a white plastic then inspect it carefully and look for slots where you can put tiny screwdrivers to pry the plastics off, then you can replace your bulb. just be careful not to break the plastic.
tnx 4 using fixya,
drcool
SOURCE: 1998 ford escort fuse box diagram
The most complete guide to ford fuse box diagram on the web...
http://fordfusebox.blogspot.com
SOURCE: 1998 toyota camry interior dome light replacement
Look closely at the cover. You will see a small slot. Insert a small flat blade screwdriver, and pry it off. Very easy..
SOURCE: Radio and interior dome lights have no power.
I just had the same problem with my 2001 escape from relacing the radio and wires accidently crossed. I switched both fuses like you said, and got no where...until....I noticed there is a 10 fuse hidden on the far right side of the panel, closest to the brake pedal. The fuse actually runs vertical unlike any of the other fuses which run horizontal, so it is kind of hidden..try that fuse, it should solve your problem, if not then I don't know sorry..
SOURCE: Interior dome/map light replacement - 2008 Honda C-RV
You will have to pry off the lens CAREFULLY using a small screwdriver. There are two (or more) little plastic protrusions on each long side of the lens which fit into the casement. Look for very small slots along the side of the lens to insert the blade of the screwdriver. You can ease the casement away from the lens enough to get it to pop out. Re-inserting it is the same, but probably easier.
Gently, give it a try.
Hope this helps you.
5,602 views
Usually answered in minutes!
Solution: The computer needs to be reprogrammed if the fuse block is replaced. No one bothered to inform the mechanic of this when he ordered the part even though he specifically asked.
The solution was it had to be reprogrammed by the dealer. You can't just change this unit out and go on with your happy life. The dealer has to hook up their magic box and program it to work correctly. I hope this helps someone else in the future!
Big help got same problem!!
Awesome, glad it helped!
×