How might I unarm the factory or possibly an after market alarm system installed for these vehicals unarmed, (self arming when battery is connected) and how in the world do you get a WalMart manufactured key out of the ignition, (went in fine, alarm willnot allow starter function & can't remove)?
Doesn't by opening the hood, that will disarm the alert system? Is it factory installed system? Try removing the fuse for the alarm system (near the system box - probably around the brake light switch). There must be a crossed wire somewhere.
SOURCE: wrong key was put in the ignition now the factory willn't work
If you managed to jam the wrong sidewinder key in the slot, you probably damaged the tumblers. The immobilizer system would simply not read the correct code and would refuse to start the Accord, nothing more. There is not a lock out function for the wrong code. More likely there is a damaged tumbler and you may have to have the Dealer replace it and reset the code.
Take it to a Honda Dealer.
SOURCE: WON'T START..NEW BATTERY ..DEALER CANNOT DIAGNOSE
remove the sparkplugs and clean the heads with a wire brush and test to see if the gap is rite
SOURCE: after a respray on my 98 boxster the passenger
The locking assembly in one or both of your doors has not been correctly re-connected.
SOURCE: where is the starter relay on a 94 Honda Accord
Yes, it sounds like your solenoid is bad and staying engaged against the flywheel, you could do an amperage draw and a voltage drop test to find out for sure, but you will need an DVOM and a amp clamp. Or you could take it into an auto parts store and they will test it for free. Hope this helps.
134 views
Usually answered in minutes!
×