1995 Jeep Grand Cherokee Logo
Posted on Nov 07, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Blend door actuator needs replacing does the

Blend door actuator needs replacing does the complete dash have to come out?

Answer This Question
  • mechanic144 May 11, 2010

    yes it does...for sure....100% for sure yes...without a doubt....sorry man...that's labour intensive...very labour intensive... once dash is out, then the heater box needs to be removed as well...then opened to replace the blen door..again, very labour intensive...

  • Anonymous Nov 30, 2013

    blend door acuator my dads mechanic replaced the actuator with out removing the dash just remove the glove box and your in ,but to remove the blend door rip the dash out

×

3 Answers

Anonymous

Level 1:

An expert who has achieved level 1.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 1 Answer
  • Posted on Nov 25, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.

Joined: Nov 25, 2009
Answers
1
Questions
0
Helped
5969
Points
27

No it doesnt ... check out heatertreaters.net if you have to replace the blend doors .... but the actuator is directly behind the glove box...remove the glove box take out 3 screws and remove actuator and replace.....waa laa

Derrick Schultz

Derrick Schultz

Level 3:

An expert who has achieved level 3 by getting 1000 points
Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.
Superstar:

An expert that got 20 achievements.
All-Star:

An expert that got 10 achievements.

  • Jeep Master 11,405 Answers
  • Posted on Jan 02, 2020
Derrick Schultz
Jeep Master
Level 3:

An expert who has achieved level 3 by getting 1000 points
Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.
Superstar:

An expert that got 20 achievements.
All-Star:

An expert that got 10 achievements.

Joined: Jan 17, 2019
Answers
11405
Questions
0
Helped
2329223
Points
23972

Didn't quite understand the issue.. but I guess instead of waiting for answers here just google it.. or like go for reliable-store.com. u can simply get answers to your questions there..

Ad

Tom

Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.
Corporal:

An expert that has over 10 points.
Welcome Back:

Visited the website for 2 consecutive days.

  • Contributor 7 Answers
  • Posted on Jan 02, 2020
Tom
Contributor
Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.
Corporal:

An expert that has over 10 points.
Welcome Back:

Visited the website for 2 consecutive days.

Joined: Jan 11, 2012
Answers
7
Questions
3
Helped
6622
Points
15

Are you sure it the blend actuator is your four wheel drive working if not the problem is something else

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

1996 Chevy Truck 1500 blend door actuator location and removal, please?

1996 Chevrolet K1500 Air Blend Door Actuator

 Advance Auto Parts https://shop.advanceautoparts.com > ... > AC Actuators
This air door actuator directly replaces the original actuator on specific vehicle years, makes, models, configurations and positions to restore proper HVAC ...

Blend door actuator

 GMT400 https://www.gmt400.com > threads > blend-door-actua...
May 3, 2021 - The blend door is in the middle of the dash and mounted on the coil box. The one by the blower controls the damper that directs air intake from ...

VCAUTO HVAC Blend Door Actuator for 1996-2013 ...

 Amazon.com https://www.amazon.com > VCAUTO-Actuator-1996-...
VCAUTO HVAC Blend Door Actuator for 1996-2013 Chevrolet Express 1500 2500 3500; 1996-2013 GMC Savana 1500 2500 3500; 1996-2013 Cadillac DeVille 604-125.
Read full answer
Dec 29, 2023 • Chevrolet 1500 Cars & Trucks
0helpful
1answer

2006 Chevy HHR 6, 2.4L. How to replace the blend door recirculation actuator on it please?
They are usually behind the centre console and glove box

https://www.google.com/search?q=2006+Chevy+HHR+6%2C+2.4L.+replace+the+blend+door+actuator

..
Read full answer
Sep 21, 2023 • 2006 Chevrolet Chevrolet HHR LT
0answers

The car is a 1997 Chrysler LHS with a 3.5 liter. This car has no heat. Have replaced thermostat and radiator. Heater core is good. Now trying to find the blend door actuator. Do you have to completely...
Read full answer
Be the first to answer Nov 29, 2018 • 1997 Chrysler LHS
0helpful
2answers

Air conditioning system, when you turn on the air conditioner the drivers side blows cold air and the passengers side blows hot air? What causes this problem?
The most common cause of this is that you have a stuck air temperature control blend door, this can be a motor actuator issue or a jammed door or both (common). To replace both parts you will need to completely remove the dash from the car to access the blend door.
Read full answer
Jul 02, 2016 • 2010 Ford Flex Limited
0helpful
1answer

Replace blend door in 07 Chrysler sebring
The most likely problem is either the blend door actuator or a broken blend door itself.
Both are only accessible by complete removal of the instrument panel(dash).
The blend door actuator can be tested with a Chrysler factory scan tool hooked up to the DLC(data link connector). If blend door actuator is working when tested with the factory scan tool, then blend door itself is at fault.
The only other way to test the blend door actuator is to test for 12v at connector, but you would have to remove the instrument panel in order to gain access to the actuator

Read full answer
Dec 24, 2014 • Chrysler Cars & Trucks
1helpful
1answer

2004 monte carlo heater door actuator replacement
This job requires the complete removal of the dash from the car and dis-assembly of the duct work to replace the blend door. You must have a factory manual to have any chance of not messing this up completely.
Read full answer
Aug 26, 2012 • 2004 Chevrolet Monte Carlo
1helpful
1answer

My 2005 2500 HD Duramax is not getting any heat inside cab. Engine is not running hot and coolant level is fine. Turned the heater controls up and down fast today and ot some heat for a while.
The temperature of the air coming out of the ducts is controlled by a door that moves between the heater core and the AC core, it is called the "blend" door for obvious reasons as it blends the hot and cold air streams to give the desired air temperature at the dash vents. The door is controlled by a small gear drive DC motor called the blend door actuator, what happens in most case is the actuator is damaged by a blend door that is warped from heat being hard to move or not moving at all which is the case with your truck. The blend door and its actuator should be replaced as one repair, the dash must be removed from the truck to access the air ducting that contains the blend door, you absolutely need a service manual to complete this job, it takes about 10 hours.
Read full answer
Feb 09, 2012 • 2006 Chevrolet Silverado 2500HD 2WD
4helpful
2answers

2003 mercury grand marquis LS heater does notr blow hot air, blower blows but cold air comes what is the problem
The blend door is stuck in cold position. That usually happens because the blend door actuator has failed.

You will need to test and replace the blend door actuator.

To replace the actuator you will need to take apart the dash and remove completely the instrument panel,d isconnect the connector, remove the four screws, remove the temperature blend door actuator and replace it.

The replacement is not a job for beginners, since you have to take apart the dash to access the actuator.

Regards.


Read full answer
Nov 18, 2009 • Mercury Grand Marquis Cars & Trucks
0helpful
3answers

01 silverado blend door changed /now works back wards!!!
most likely needs a LH (bottom) temp actuator. Located in the center of the dash on the bottom, you have to remove the hush panel on the rh side of the truck
Read full answer
Apr 24, 2009 • 2001 Chevrolet Silverado
7helpful
2answers

Heat flowing on passenger side only
your actuatior foe the drivers blend door is stuck. try unhooking battery for a few minutes have both on heat and hook back up and start up. the actuators will run thru a learn mode and sometimes this will free up.if not you will need an actuator
Read full answer
Dec 09, 2008 • 2005 Chevrolet Silverado
Not finding what you are looking for?

View Most Popular

1995 Grand Cherokee

  • Cars & Trucks

Related Question

1996 Chevy Truck 1500 blend door actuator location and removal, please?

  • Chevrolet 1500 Cars & Trucks

Related Topics

5,979 views

Ask a Question

Usually answered in minutes!

Popular Questions

GAUGES GO CRAZY AND SOMETIMES VEHICLE WON'T START

2002 Jeep Grand Cherokee

2007 JEEP GRAND CHEROKEE. TRANSMISSION OVER TEMP

2007 Jeep Grand Cherokee Overland

Fuse panel diagram for 2002 Jeep Grand Cherokee

2002 Jeep Grand Cherokee

2007 Jeep Grand Cherokee won't CRANK - battery is fine.

2007 Jeep Grand Cherokee Overland

Firing order for a Jeep

Jeep Grand Cherokee Cars & Trucks

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
. 1995 Grand Cherokee Manual

1995 Grand Cherokee

Loading...