You will need to open the trunk and remove the carpet covering the inside where the tail lights are, find 2 or 3 nuts which are probably 8 or 10 mm,so use a socket and ratchet,remove the nuts and pull the tail light asembly out from the back and you will find the tail light bulb sockets. release the little latch/lock clips while turning the socket assembly about 1/4 turn counter clockwise and you can check each bulb. watch where the wire harness for each socket and also the tail light assembly is so you dont pinch or damage the wires when putting the tail light assembly back in. your owners manual may also give you these instructions and will tell you the correct bulbs to use for tail, brake and turn signal lights.
Testimonial: "Those were the exact instructions needed. Bulb replaced. Thanks!!"
571 views
Usually answered in minutes!
×