P242F Bank1Sensor3 sprinter fault codes 07 Sprinter 2500

LOST THE USERS GUIDE IN THE GLOVE BOX
IT MEANS IT NEEDS SERVICE , IN A SHOP.
WRENCH CODES ARE HUGE ON THIS CAR.
LOST FREE MANUAL IS HERE

https://sprintermanual.com/wp-content/uploads/2017/12/Sprinter-Van-Operators-Manual-2013.pdf


FOR ALL I KNOW THE WRENCH MEANS OIL CHANGE NAG
OR ASK HERE ON A REAL MB FORUM
POSTING PHOTO OF ANY ERROR IS MAGIC,
YOU GET THE TRUTH, FAST.
WE CANT SEE YOUR DASH OR FIDDLE THE BUTTONS TO SEE ALL ERRORS

ASK HERE IS BEST, SPRINTER ONLY FORUM..

https://sprinter-source.com/forums/index.php?threads/73896/

P0101, mass air flow circuit range, P242F appears to be a non code , may mean don't forget to repair previous code. Check and repair mass air flow problem . then delete code, code will reappear if fault not fixed.

autozone

Throttle/Pedal Position Sensor/Switch "C" Circuit Low Input
p242f is bogus try typing that 1 more time.

my wild guess, is you dont have FSM or access to alldata.com?
and guess 2, (im too lazy to look it up) its a flyby wire car?
if yes, then you need training on flyby wire, its COMPLEX.
guessing and throwing parts is very expensive on FBW, 10x so.

if you know understand FBW, then read the FSM ,it covers all this in great and complex details.

FBW is, you tell ECU how fast you want to go, and it does ALL that magic. (short version)

do you want guessing, or real tests.
say so please.
for $15 low bucks , you can read all night, and be ready in the morn.
discounted here,
http://www.scantool.net/software/alldata-diy-1-month-subscription.html

btw2, are you going to spend $2000 on parts.
just to find an air leak?
here is the #1 rule for EFI,
the ECU/PCM NEVER !, knows what part is bad!
it only knows what monitor test failed (DTC'S)
that takes a human, to conduct more tests to find truth.
this is a fact. knowing this one fact,would make most parts
stores go broke fast... .I promise.

Hi there a Particulate Filter is a device fitted to diesel vehicles that remove soot from the exhaust gases exiting the engine, they are normally located under the vehicle between the downpipe and back box.Hope this Helps

crank sensor /cam sensor corrolation codes meaning one was changed and the system wasn't relearned

need to notify division manager or district for dodge and advise of complaint

i could help you better if i had the code #s, check the battery and the charging system.