Yes it does show a p0341 code I/C camshaft postion module,,,,,but its very deciving as there is NO camshaft position module on these cars,,,it means there is a secondary ignition problem,,,like old spark plugs and wires(do not use bosch platinum plugs),,or a crank sensor which is located in the engine block under the intake manifold,,,,or a ignition module which is what the spark plug wires connect to by the trans,,,,it could be any of those,,,i would start with spark plugs and wires and clear the code and see if it comes back,,these cars are odd with this code,,i didnt understand it either til i became a saturn tech
yes it does show a p0341 code I/C camshaft postion module,,,,,but its very deciving as there is NO camshaft position module on these cars,,,it means there is a secondary ignition problem,,,like old spark plugs and wires(do not use bosch platinum plugs),,or a crank sensor which is located in the engine block under the intake manifold,,,,or a ignition module which is what the spark plug wires connect to by the trans,,,,it could be any of those,,,i would start with spark plugs and wires and clear the code and see if it comes back,,these cars are odd with this code,,i didnt understand it either til i became a saturn tech
×
CORRECT:
The diagram in the manuals should show the timing marks on both cam gears to be on the blue timing chain links.
331 views
Usually answered in minutes!
×