Re: Locked Out of 2000 Ford ZX3, How do I shim open the...
Your gonna need a lockout kit, you can also try to wedge top of door open a little ,then use a coat hanger ,try to hit power locks or try to push lock lever button. good luck.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Look into the lock opening on the door frame for a part you can reach with a flat-blade screwdriver.
These can normally be opened if prying on the lock mechanism.
If you want to risk another door, watch the mechanism move when locking it manually.
You should then be able to reset both.
I believe it is near the passenger's side floorboard, right behind the door hinge. There is an indentation with a rubber button and the fuel symbol near it.
you will need to make sure the door isn't locked,if it still won't open from inside,you will need to remove door panel to see if the rod from the door handle to the latch is still connected
two options just pull them straight up or they make a special tool that you can buy to do this. if you are going to replace plugs you should go ahead and do the wires at the same time.
Anything is possible, but it depends on what you were told and who told you. If the thing is making noise, by all means replace it. If you are not sure, get a mechanics stethoscope. Another factor with an AC clutch (and bearing) is the amount of gap in the clutch pads when the AC is off. They measure that in thousandths of an inch. The gap on a Ford can be adjusted by adding or removing shims. It would be easier to advise if I had more information.
×