Low beams shut off and won't come on other lights work. high beams work, turning signal works,hazard lights work but the low beams do not.

Likely a bad ground, but could be a fuse(s), or a failed multifunction switch, or BCM. It requires circuit testing to identify the cause.

Does it do the same with the lights on 'High' beam? If it works correctly on 'High' beam it could be the switch in the lever at fault.
Next check the fuses for the turn signals and the Hazard lights. They will be in the fuse box under the hood. Some vehicles will have separate fuses for Left, Right and Hazard lights others may share fuses.
If the fuses are OK it could be a faulty flasher unit. Check to see if the hazard lights work correctly. Some vehicles use separate flasher units for turns and hazards and others share 1.

Check your fuses first and then check your hazard flasher relay. As for your high/low beams, could be your head light switch itself.

seems like the multi-function switch is failing
easy to replace and fairly common

Those lights are on different circuits. The high and low beam lights are powered thru the headlight switch, the turn signals, brake, and hazards go thru the turn signal switch.
I would want to know if each circuit has power at the switch that controls it.

CHECK UNDER HOOD FUSE BLOCK FOR FUSES AND CIRCUIT BREAKER AND RELAYS....IF NOT IT IS AN ELECTRICAL DIAGNOSES. USE A MULTI METER TO SEE IF YOU ARE GETTING CLOSE TO 12 VOLTS AT SOURCE!
***NO EASY FIX...ALMOST EVER!!!

Get a schematic and trace out the power source to those devices not working.

WAY TO GO !!! another "great idea" from vehicle manufactures

just replace the dimmer switch under the column its wore out on the low beam side

The turns,hazards, high/ low headlamps, possibly cruise cont. and wipers, are all operated by the "multifunction switch". Replace it and you should be good to go. I hope this helps.