At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If you had two blinking CEL codes, a 12 (pause) and a 55, the code 12 means the battery has been disconnected within the previous 50 starts. The code 55 indicates the end of stored codes. Therefore, you have no saved trouble codes (disconnecting the battery deletes saved trouble codes).
As far as codes go, I'm thinking you were getting code 12 and code 55, which means (12) that battery was recently disconnected or went dead, and code (55) is the end of message code. I'm also wondering for sure whether you have a 5.2L, or 5.9L. Could you reply with more info like Make, model, year, and double check what engine, just so we get it right for you.
n most 90's and up Dodge/Chrysler vehicles, you can try to pull codes from the car's computer as long as you still have a charged battery. Put your key in the ignition, and turn it forward, but not far enough to engage the starter. Turn the key back to the Off position, then forward, back and forward again. In early 90s vehicles, the Check Engine light is going to flash a number of times. Often, code 55 means it is completed. In mid and late 90s vehicles, you will often get a 4 digit code that may help you diagnose problems starting, mostly checking the eletrical, ignition and sensor systems.
Just maybe your O2 sensors are not operating properly. They may be requiring your engine to heat them up to get upper temperature readings but not lower. You can easily diagnose these and all other sensors and problems by purchasing a Hains manual at your local Auto Zone or Advance auto store which will greatly aide you in diagnosing all your auto needs. And the fault symptom index at the beginning of the book will ease your troubles with professional one on one advice with step by step instructions. Its like having your own ASE certified mechanic at your finger tips. Good luck.
chrysler codes are counted by flashes followed by a pause between codes..what you have is a code 12-start codes, code 33-AC relay circuit ope or shorted, code 24-throttle position sensor voltage too high or too low, code23-a problen with your air tempature sensor, code 55-end of codes. Next time call any parts dealer, napa,autozone, etc. they will be glad to help you..
×