Land Rover Freelander V6 Petrol, 2001, Oil Light (Red) flickers on when engine is at very low rpm (6-700) no noises or lack of power ect... Any ideas

Land Rover Freelander
P0304 AND P0305<<<<<< no engine told at all. a V6 of sorts.?
ONLY>?
misfire on OBD2 means, only weak combustion pressures there.
or weak power from those 2. only
causes are manifold.

1. bad spark plugs there. (i bet all)
2. bad /weak injectors there.
3. weak compression on this 2, (a tool tests this)
4. burned head valves there.
5. blown head-gasket between 4 to 5 (I6) (NO)
6. vacuum leaks (air) to #4 of #5 via intake man or injector seals.
7. bad spark coils. or boots on there tips a carbon wreck.
8. worse deeper engine issues, cam lobes, a mess. or piston rings.

wild guess is this your engine?
2.5-litre V6 Rover KV6 Engine petrol (2001-2006), badged as 'V6'
24-valve quad-cam DOHC.
and horrid belt drive cams super hard to fix. lacking custom tools.
Firing order. 1-6-5-4-3-2
1, 3 and 5 starting at the front of the engine. left-hand bank
means even odd banks.
means head gasket can not do #5 act this V6 not I6
why do a tuneup, 100k miles , new spark plugs and boots on COPs
there are 6 cops there, COIL OVER PLUGS.
The boots can be replaced cheap, on tips and new spark plugs
gapped to spec.
USA.(answers)

as you see COP 4 AND 5 DO NOT SHARE SPARK COILS.

Sounds like you need a new oil pump

Land Rover Freelander 2002-2005 KV6 Timming belt and ...

? 4:31
https://www.youtube.com/watch?v=sz_oe9tIFH4
Jul 3, 2011 - Uploaded by Jaime Depaula
Land Rover Freelander 2002-2005 KV6 Timming belt andreplacing valves - Video 2 ... shops in North Eastern USA for bent valves and timing belt change? .... Land Rover 200tdiTiming Belt -From Broken Belt to Retiming the ...

ROVER K Series Cambelt Change Video - YouTube

? 10:52
https://www.youtube.com/watch?v=1Qn8ljQKZxA
May 4, 2012 - Uploaded by metalworker007
How to change a rover K series cam belt .. by Technozen of ...soy espa?ol porfavor quiero saber timing marks de MG ROVER 25 petrol 1795cc engen .... Hi, Have a Land Rover Freelander1999 petrol serie K, that dont start, ...

Freelander 1.8i timing belt - Land Rover Technical Archive - LR4x4 ...

forums.lr4x4.com > ... > Tech Archive > Land Rover Technical Archive

Nov 20, 2006 - 1 post - ‎1 author
The following is instructions for replacing the timing (or camshaft) belt on the 1.8i petrol engine, as fitted to a Freelander. This is the K-series ... With the timing set, thecam sprocket marks should look like this. Posted Image

How to Replace timing belt on Land Rover Freelander 2.5 ...

which engines, you do know the engine size, type ,name and gas/diesel , dictates what fuel system you have, right?
most gas cars, USA have moved this to the inside of the gas tank
by uSA EPA edicts. i sure as heck cant speak for non USA cars.
lacking the engine facts or country.

gen4, line up
3.0 L V6 Petrol
5.0 L V8 Petrol
3.0 L V6 Diesel
4.4 L V8 Diesel[1]

which one?

state side the EPA mode the filter inside the tank. to lower fuel heating and bingo evaporation losses (fact)

If it won't start have a compression test done and see if one bank doesn't have compression . The intake cam is known for breaking at the front lobe

Download this link and find your Service manual for your vehicle. It will serve you well and to keep for future reference

http://ezinearticles.com/?Find-the-Free-Auto-Repair-Manual-You-Need-Online&id=92717

This is proplem with the IAC valve , try clean the valve and if that doesnt work replace it.

An IAC (idle air control) motor is designed to adjust the engine idle RPM speed by opening and closing an air bypass passage inside the throttle body

Thanks
Kindly rate the answer
Smith

Please check for your transfer box.

this could be a throttle position sensor get plugged in after market parts to replace about £25